Viewing an External Signal Source (depending on the model)
T V |
| Input | |
Source List | : | TV | |
Edit Name |
|
| |
Move | Enter | Return | |
T V |
|
| Source List |
TV |
| : | |
Ext.1 |
| ||
Ext.2 |
| : | |
: | |||
Component | : | ||
HDMI |
| : | |
Move | Enter | Return | |
Use the remote control to switch between viewing signal from connected equipment, such as VCR, DVD,
1Press the MENU (
) button to display the menu.
2 Press the ENTER (
) button to select Input. 3 Press the ENTER (
) button again.
4Press the ▲ or ▼ button to select the required signal source, then press the ENTER (
) button.
Available signal source: TV, Ext. 1, Ext. 2,
HDMI
➢ | ◆ | When you connect equipment to the TV, you can choose between the | ||
|
| following sets of jacks: Ext. 1, Ext. 2, Component, or HDMI on the TV’s | ||
|
| rear panel, and | ||
| ◆ | You can also set these options simply by pressing the TV ( ) or SOURCE | ||
|
| ( |
| ) button. If you change the external source while viewing, pictures |
|
|
| ||
|
| might take a short period of time to be switched. | ||
Editing Device Names (depending on the model)
T V |
| Input | |
Source List | : | TV | |
Edit Name |
|
| |
Move | Enter | Return |
T V |
| Edit Name |
Ext.1 |
| VCR |
Ext.2 |
| |
| Cable STB | |
AV |
| DVD |
| HD STB | |
| Sat. STB | |
AV Receiver | ||
Component |
| |
HDMI | : | |
Move | Enter | Return |
You can give a name to the external source.
1Press the MENU (
) button to display the menu.
2 Press the ENTER (
) button to select Input.
3Press the ▲ or ▼ button to select Edit Name, then press the ENTER ( 
) button.
4Press the ▲ or ▼ button to select the external source to be edited, then press the ENTER (
) button.
5Select the required device’s name by pressing the ▲ or ▼ button, then press the ENTER (
) button.
Available device names: VCR, DVD, Cable STB, HD STB, Sat. STB, AV Receiver, DVD Receiver, Game, Camcorder, DVD Combo, DHR (DVD HDD Recorder), or PC.
6Press the EXIT ( 
) button to exit.
English - 10
