La Crosse Technology WT-5442 DST Daylight Saving Time Setting, Adjustable Snooze Time

Page 7

D.DST (DAYLIGHT SAVING TIME) SETTING

Note: The DST default is “On”, meaning that the WWVB will automatically change the time according to Daylight Saving Time in the spring and fall. For areas that do not recognize DST changes (Arizona and parts of Indiana) turn the DST “OFF”.

1.Hold down the “SET” button for 1 second (the selected time zone will flash); press the “SET” button once more until “On” flashes in the lower left and “DST” flashes in the upper right.

2.Press and release the “Mode/+” button to turn the DST off, as will be indicated by the display of “OFF” in the time LCD.

Note: Only turn the DST setting off if you live in an area that does not change time for Daylight Saving Time.

3.Press and release the “SET” button to confirm the DST setting, and to advance to select the length of the snooze.

E.ADJUSTABLE SNOOZE TIME

Note: The snooze length can be adjusted from 1 minute to 59 minutes. This duration refers to the length of time the alarm will be disabled when the “SNOOZE” bar is pressed. If set to “0”, activating the snooze will turn off the alarm for 24 hours.

1.Hold down the “SET” button for 1 second (the selected time zone will flash), press the “SET” button 2 more times, until “Sno” appears in the lower left and duration (“:10” default) flashes in the time LCD.

2.Press and release the “Mode/+” button to advance the snooze time from 0 (off) to 59 minutes.

3.Press and release the “SET” button to confirm the snooze setting, and to advance to manually set the time.

F.TIME SETTING

Note: When the WWVB signal is found, that time will over-ride the manually set time.

1.Hold down the “SET” button for 1 second (the selected time zone will flash), press the “SET” button 3 more times, until the hour flashes in the time LCD.

2.Press and release the “Mode/+” button to select the hour. Note: when setting the hour, “PM” will appear to the left of the hour display, if it is AM nothing will be displayed.

3.Press and release the “SET” button to confirm the hour setting, and to advance to select the minutes.

4.Press and release the “+” button to select the minutes.

7

Image 7
Contents Page Inventory of Contents Table of ContentsQuick SET-UP Guide Features of Projection AlarmPage II. Program Mode Projection AlarmFunction Buttons Time Zone SettingAdjustable Snooze Time DST Daylight Saving Time SettingTime Setting 12/24-HOUR Setting Date SettingRADIO-CONTROLLED Time and Date III. Features & OperationsIndoor Temperature Time Alarm Remote TemperatureSetting the Alarm Turning Alarm OFF While Sounding ACTIVATING/DEACTIVATING the AlarmMounting with Screws IV. Mounting the Remote Temperature TransmitterMounting with Adhesive Tape Maintenance & Care Solution TroubleshootingTemperature Warranty Information