La Crosse Technology WS-9046U instruction manual II. Function Keys, III. Setting the LCD Contrast

Page 6

II.FUNCTION KEYS

The function keys are located on the front of the unit directly below the LCD (Liquid Crystal Display).

ALM/+ key

SET key

IN/HR key	WIND/RAIN/	OUT/MIN key
	WIND/RAIN/
	SNZ key

III.SETTING THE LCD CONTRAST

1.Press and hold the SET button for 5 seconds.

2.“LCD” will show in the TIME LCD and the number setting will flash.

Note: There are 8 LCD contrast levels to choose from—“Lcd 0” is the lightest, and “Lcd 7” is the darkest.

3.Press and release the ALM/+ button to select the level you desire.

4.Press and release the SET button to confirm and advance to the Time Zone setting.

IV. TIME ZONE SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button again.

4. The time zone will flash in the DATE LCD.

5. Press and release the ALM/+ button to select your time zone.

Note: It is possible to select any time zone from –12 GMT to +12 GMT (for example to see the time in another country)

TIME ZONES

	GMT	0
	Atlantic	-4
EST;	Eastern	-5
CST;	Central	-6
MST;	Mountain	-7
PST;	Pacific	-8
ALA;	Alaska	-9
HAW;	Hawaii	-10

6.Press and release the SET button to confirm and advance to the Daylight Saving Time setting.

V. DAYLIGHT SAVING TIME (DST) SETTING

1. Press and hold the SET button for 5 seconds.

2. “LCD” will show in the TIME LCD and the number setting will flash.

3. Press and release the SET button twice.

4. “DST” will appear in the DATE LCD and either “ON” or “OFF” will flash in the TIME LCD.

5.Press and release the ALM/+ button to select DST on or off. 5

Image 6

Contents WS-9046U Table of Contents Inventory of Contents Optional Sensor Purchase SeperatelyQuick SET-UP Guide Additional Equipment not includedAbout Wwvb Radio Controlled Time Important Notes on Set-up and OperationProgram Mode Detailed SET-UP Guide Battery InstallationRemote TEMPERATURE/HUMIDITY Programming Sequence and Default SettingsDaylight Saving Time DST Setting III. Setting the LCD ContrastIV. Time Zone Setting II. Function KeysManual Time Setting VIII. Time SettingWwvb Remote Control Time IX. Setting the YEAR, DAY and MonthXiii Setting the Forecast Sensitivity Setting the SnoozeSetting the Unit of Rainfall inch/ mm Selecting F or CFeatures of the WS-9046U Weather ForecastWeather Icons Viewing the Indoor Temperature Records III. Outdoor Temperature and HumidityIV. Minimum and Maximum Temperature Records Viewing the Outdoor Temperature RecordsMoon Phase VI. Viewing the CURRENT, Maximum and Minumum DEW PointVIII. Beaufort Scale Wind Speed Fort Number Or Force Wind Speed Mph Km/hr KnotsIX. Rainfall Measurement Time Alarm To reset the maximum rainfall measurementsTo return to the normal viewing mode To view the current rainfall measurementsMounting with Adhesive Tape Mounting Remote TEMPERATURE/HUMIDITY SensorMounting with Screws Mounting with Nylon StrapsII. the Remote Wind Speed Sensor Mounting with the U-SHAPED BoltIII. the Rain Sensor Optional Troubleshooting Maintenance and Care InstructionsIII. the Indoor Weather Station Dimensions H x W x D SpecificationsPower Supply Weather data measuring rangeFCC Disclaimer