La Crosse Technology WS-7138U Mounting Using the Stand, II. the Indoor Weather Station

Page 19

5.Position the remote temperature/humidity sensor in the desired location, ensuring that the indoor weather station can receive the signal.

C.MOUNTING USING THE STAND

The mounting bracket can be used as a stand by simply attaching the bracket to the bottom of the temperature/ humidity sensor. Once snapped in place the sensor can then be placed on a shelf, table or other surface where the temperature and humidity measurements are desired.

II.THE INDOOR WEATHER STATION

The indoor weather station can be mounted in two ways:

with the table stand

on the wall with the use of a wall hanging screw (not included).

A.USING THE TABLE STAND

The indoor weather station comes with the table stand already mounted. If you wish to use the table-stand all that is required is to place the indoor weather station in an appropriate location.

B.WALL MOUNTING

1.Remove the table-stand. To do this, pull down on the stand from the rear and rotate forward.

2.Fix a screw (not included) into the desired wall, leaving approximately 3/16 of an inch (5mm) extended from the wall.

3.Place the indoor weather station onto the screw using the hanging hole on the backside.

19

Image 19
Contents WS-7138U Table of Contents Inventory of Contents Do not Press ANY Buttons for 15 Minutes Quick SET-UP GuideIndoor Weather Station Programming Sequence and Default Settings Program ModeIN/OUT, SET/CH II. Function KeysIII. Selecting F or C IV or 24 Hour Time SettingTime Setting VI. Setting the YEAR, Date and Month Indoor TEMPERATURE, HUMIDITY, and Comfort Level Indicator Features of the WS-7138UIII. Minimum and Maximum Temperature Records II. Outdoor Temperature and HumidityViewing the Indoor TEMPERATURE/HUMIDITY Records Page Viewing the Outdoor TEMPERATURE/HUMIDITY Records Resetting the Mimimum and Maximum Records SET-UP of Multiple Units IV. Adding Remote TEMPERATURE/HUMIDITY Sensors OptionalMounting Mounting with Adhesive Tape Mounting with ScrewsWall Mounting Mounting Using the StandUsing the Table Stand II. the Indoor Weather StationMaintenance and Care Instructions TroubleshootingTemperature measuring range SpecificationsWarranty Information Support@lacrossetechnology.com