La Crosse Technology WS-7138U Program Mode, Programming Sequence and Default Settings

Page 6

seconds, and reinstall making sure to install batteries into the remote temperature/humidity sensor first.

PROGRAM MODE

Programming Note: If 30 seconds is allowed to pass, or the IN/OUT, SET/CH button is pressed during the programming mode, the unit will confirm/set the last information entered—the display will stop flashing and return to normal time-date readings. If you don’t leave the program mode during the programming of sections IV through VI, you can advance to step 4 of the next program setting. If you do leave the program setting (or want to program a specific setting) follow each instructional step to program that setting.

I.PROGRAMMING SEQUENCE AND DEFAULT SETTINGS

The programming sequence and default (factory) settings are as follows:

Temperature Format	°F
12/24-hour time	12
Time	12:00
Year	2003
Date and Month	1.1.

6

Image 6

Contents WS-7138U Table of Contents Inventory of Contents Quick SET-UP Guide Do not Press ANY Buttons for 15 MinutesIndoor Weather Station Program Mode Programming Sequence and Default SettingsII. Function Keys IN/OUT, SET/CHIV or 24 Hour Time Setting III. Selecting F or CTime Setting VI. Setting the YEAR, Date and Month Features of the WS-7138U Indoor TEMPERATURE, HUMIDITY, and Comfort Level IndicatorII. Outdoor Temperature and Humidity III. Minimum and Maximum Temperature RecordsViewing the Indoor TEMPERATURE/HUMIDITY Records Page Viewing the Outdoor TEMPERATURE/HUMIDITY Records Resetting the Mimimum and Maximum Records IV. Adding Remote TEMPERATURE/HUMIDITY Sensors Optional SET-UP of Multiple UnitsMounting Mounting with Screws Mounting with Adhesive TapeII. the Indoor Weather Station Mounting Using the StandUsing the Table Stand Wall MountingTroubleshooting Maintenance and Care InstructionsSpecifications Temperature measuring rangeWarranty Information Support@lacrossetechnology.com