Press the “STOP” button once to stop playback of the pro- grammed compilation. The programmed compilation of titles continues to be stored.
Press the “STOP” button a second time to terminate the program function and erase the programmed compilation. “PRG” indicated on the display is faded out.
. Switching off the set
To switch off the set adjust “OFF” with the function selector on the
. Connecting headphones
To connect headphones plug the 3.5 mm jack plug of the headphones into the headphones socket on the
. Cleaning
Only use a slightly moist cloth to clean the case surface of the set. Ensure when cleaning that no moisture enters the set.
The inside of the CD compartment must only be cleaned with a clean, dry brush (e.g. lens brush available from pho- tographic dealers). NEVER moist clean the inside of the CD compartment!
Warning!
Moisture penetrating the set can give rise to the danger of an electric shock!
Only clean the laser scanning lens inside the CD compart- ment (if necessary) with a clean, dry brush. NEVER touch the laser scanning lens with bare hands!
Please note!
Only clean the laser scanning lens inside the CD compart- ment (if necessary) with a clean, dry brush. NEVER touch the laser scanning lens with bare hands!
. Functional faults
Proceed in the following manner in the event of functional
faults of the set …
•First disconnect the plug from the mains socket or remove the batteries from the battery compartment.
•Check that there is at least 10 cm space above, behind and on either side of the set in relation to walls or objects.
If this is not the case, then switch off the set and allow it | GB |
to cool down for at least one hour! Relocate the set in |
|
Operating Instructions |
|
Manual_KH2241_EN | 15 | 16.09.2003, 14:56 Uhr |