Manuals / Meridian America / Home Audio / CD Player

Meridian America 508 manual

Models: 508

1 32

Download 32 pages 32.72 Kb

Page 28

There is interference on the radio and/ or television when the CD player is switched on

Setting up the CD player

There is interference on the radio and/ or television when the CD player is switched on

Before following the steps below, ensure all units are switched off first.

If this equipment does cause or suffer from interference to/from radio or television reception then the following measures should be tried:

❍Reorient the receiving aerial (or antenna) or route the antenna cable of the receiver as far as possible from the 508 20-Bit CD Player and its cabling.

❍Ensure that the receiver uses well-screened antenna cable.

❍Relocate the receiver with respect to the CD player.

❍Connect the receiver and this product to different AC outlets.

The display shows No disc when attempting to play a disc

❍Check that the disc is positioned correctly in the drawer, with the label uppermost; see To insert a disc, page 9.

❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.

The display shows Error when attempting to programme a disc

❍Check that the disc includes the track number you are attempting to programme.

❍Check that you have not already programmed 31 tracks, the maximum number.

24

Image 28

Meridian America 508 manual There is interference on the radio and/ or television when the CD player is switched on

Contents

Meridian 508 20-BitCD Player Preface Sales and service in the UKSales and service in the USA Designed and manufactured in the UK byContents Using the CD playerSetting up the IntroductionPreface Introduction Professional features The Meridian 500 Series500 Series communications IntroductionSample configurations 508 20-BitCD Player500 Compact Disc Transport Introduction566 20-BitDigital to Analogue 502 Analogue ControllerConverter Introduction562V Multimedia Controller IntroductionSatellite Video Recorder 504LaserDisc DSP6000 DSP6000 TelevisionSpecification and accessories SpecificationAvailable accessories IntroductionUsing the CD player Front panel Using the CD playerPlay Switching on and off To switch on from standbyTo switch to standby UsingPlaying a disc To move to the next trackTo play starting from a particular track To play the discStopping, pausing, and repeating play To continue after pausingTo cancel the repeat function To continuously repeat a discError Programming a selectionTo choose a track to programme StoreTo remove a track from a selection To clear a programmeTo add a track to a selection ClearDisc information and scanning To change the displayScanning a disc To scan through a discUsing index points To move to an index pointTo display the index number 14.7Changing the absolute phase To review the phase settingTo change the phase setting Using the CDSetting up the CD player Setting up the CD player UnpackingTo position the CD player Radio interferenceSetting up the CD player Connecting the CD playerBack panel Setting up To connect to other MeridianSeries equipment N.ConTo connect to a 501 Control Unit To connect to a conventional preamplifierSetting up the CD player 501 Control UnitSetting up the CD player TypeType Troubleshooting No lights are displayed when switching onThere is no sound when playing a disc The drawer will not openThere is interference on the radio and/ or television when the CD player is switched on Maintenance CleaningTo clean the case, display panel, and keypad To clean the audio connectionsService and guarantee ServiceGuarantee Setting up the CD playerIndex IndexIndex N No disc display O Optical EIAJ output Outputs