Manuals / Meridian America / Home Audio / CD Player

Meridian America 508 manual Troubleshooting, No lights are displayed when switching on

Models: 508

1 32

Download 32 pages 32.72 Kb

Page 27

Troubleshooting

Troubleshooting

This section describes problems you may encounter when using the CD player, and includes suggested solutions.

If these suggestions fail to cure the problem, please contact your Meridian dealer for further assistance.

No lights are displayed when switching on

❍Check that your AC power supply is connected correctly.

❍Check that the ON OFF switch on the back panel is in the ON position.

❍Check that the fuse on the CD player back panel and the fuse in the unit’s power plug have not blown; see To change the mains fuse, page 25.

The drawer will not open

❍Check that the standby display is shown.

If the standby display is shown:

❍Switch off the CD player and disconnect it from the AC power supply.

❍Try opening the drawer gently, by hand. Do not use force.

❍Restore power to the CD player.

There is no sound when playing a disc

❍Check that your preamplifier is switched on, and the volume is at an appropriate level.

❍Check that the CD player is connected correctly to the other components of your system; see Connecting the CD player, page 19.

❍Check that the correct source has been selected on your preamplifier.

❍Check that the Pause indicator is not lit.

❍Try playing another disc. If this disc works, check the problem disc for signs of dirt or damage.

Setting up the CD player

23

Image 27

Meridian America 508 manual Troubleshooting, No lights are displayed when switching on, The drawer will not open

Contents

Meridian 508 20-BitCD Player Designed and manufactured in the UK by PrefaceSales and service in the UK Sales and service in the USAIntroduction ContentsUsing the CD player Setting up thePreface Introduction Introduction Professional featuresThe Meridian 500 Series 500 Series communicationsIntroduction Sample configurations508 20-BitCD Player 500 Compact Disc TransportIntroduction 566 20-BitDigital to Analogue502 Analogue Controller ConverterDSP6000 DSP6000 Television 562V Multimedia ControllerIntroduction Satellite Video Recorder 504LaserDiscIntroduction Specification and accessoriesSpecification Available accessoriesUsing the CD player Using the CD player Front panelPlay Using Switching on and offTo switch on from standby To switch to standbyTo play the disc Playing a discTo move to the next track To play starting from a particular trackTo continuously repeat a disc Stopping, pausing, and repeating playTo continue after pausing To cancel the repeat functionStore ErrorProgramming a selection To choose a track to programmeClear To remove a track from a selectionTo clear a programme To add a track to a selectionTo scan through a disc Disc information and scanningTo change the display Scanning a disc14.7 Using index pointsTo move to an index point To display the index numberUsing the CD Changing the absolute phaseTo review the phase setting To change the phase settingSetting up the CD player Radio interference Setting up the CD playerUnpacking To position the CD playerConnecting the CD player Setting up the CD playerBack panel N.Con Setting upTo connect to other Meridian Series equipment501 Control Unit To connect to a 501 Control UnitTo connect to a conventional preamplifier Setting up the CD playerType Setting up the CD playerType The drawer will not open TroubleshootingNo lights are displayed when switching on There is no sound when playing a discThere is interference on the radio and/ or television when the CD player is switched on To clean the audio connections MaintenanceCleaning To clean the case, display panel, and keypadSetting up the CD player Service and guaranteeService GuaranteeIndex IndexN No disc display O Optical EIAJ output Outputs Index