Programming a selection
With the remote you can programme a selection of tracks, and then play only those tracks you have programmed.
You can programme a selection either by storing the tracks you want to play, or by clearing the tracks you do not want to play. If you programme a selection by storing the tracks you want to
To programme by specifying the tracks you want to play
●Choose the first track you want to play, as described above.
The display will show the track
hear, you can play the tracks in any order and repeat tracks in the sequence.
number; for example:
Track 14
●Press Store (remote only).
You can programme a selection while the disc is playing, in which case the selection will be played after the current track finishes.
The display will change to:
Store 14
Attempting to programme more than | Error |
31 tracks will display an error warning: |
You should store the track within two seconds, or it will begin to play.
The track will be labelled Store.
Using the CD player
To choose a track to programme
●Press Next or Previous to step through the track numbers until the track you want is displayed, or type the number of the track you want.
All the other tracks are initially programmed not to play, and will be labelled Clear.
12