Manuals / Meridian America / Home Audio / CD Player

Meridian America 508 manual Unpacking, To position the CD player, Radio interference

Models: 508

1 32

Download 32 pages 32.72 Kb

Page 22

Unpacking

Unpacking

Setting up the CD player

The 508 20-Bit CD Player comes in a box containing the following components:

❍508 20-Bit CD Player.

❍1 power cord.

❍1 optical connector blanking plug.

❍This manual.

You are advised to retain the packing in case you need to transport the unit.

To position the CD player

Do not place the CD player:

❍In direct sunlight.

❍Near heat sources, eg a radiator.

❍On top of a power amplifier, as the heat generated may damage the CD player.

However, it can be stacked under a 562 Control Unit and

504 Stereo FM Tuner, if you have these Meridian components in your system.

In common with all CD players, the 508 20-Bit CD Player emits some radio-frequency signals. Therefore, you should try to keep all power cables and network leads away from signal cables, including audio, antenna, and loudspeaker cables.

Radio interference

FCC Warning: This equipment generates and can radiate radio frequency energy and if not installed and used correctly in accordance with our instructions may cause interference to radio communications or radio and television reception. It has been type-tested and complies with the limits set out in Subpart J, Part 15 of FCC rules for a Class B computing device. These limits are intended to provide reasonable protection against such interference in home installations.

EEC: This product has been designed to comply with the limits set out in EN55013 and EN55020C.

18

Image 22

Meridian America 508 manual Unpacking, To position the CD player, Radio interference, Setting up the CD player

Contents

Meridian 508 20-BitCD Player Sales and service in the USA PrefaceSales and service in the UK Designed and manufactured in the UK bySetting up the ContentsUsing the CD player IntroductionPreface Introduction 500 Series communications Professional featuresThe Meridian 500 Series Introduction500 Compact Disc Transport Sample configurations508 20-BitCD Player IntroductionConverter 566 20-BitDigital to Analogue502 Analogue Controller IntroductionSatellite Video Recorder 504LaserDisc 562V Multimedia ControllerIntroduction DSP6000 DSP6000 TelevisionAvailable accessories Specification and accessoriesSpecification IntroductionUsing the CD player Front panel Using the CD playerPlay To switch to standby Switching on and offTo switch on from standby UsingTo play starting from a particular track Playing a discTo move to the next track To play the discTo cancel the repeat function Stopping, pausing, and repeating playTo continue after pausing To continuously repeat a discTo choose a track to programme ErrorProgramming a selection StoreTo add a track to a selection To remove a track from a selectionTo clear a programme ClearScanning a disc Disc information and scanningTo change the display To scan through a discTo display the index number Using index pointsTo move to an index point 14.7To change the phase setting Changing the absolute phaseTo review the phase setting Using the CDSetting up the CD player To position the CD player Setting up the CD playerUnpacking Radio interferenceSetting up the CD player Connecting the CD playerBack panel Series equipment Setting upTo connect to other Meridian N.ConSetting up the CD player To connect to a 501 Control UnitTo connect to a conventional preamplifier 501 Control UnitSetting up the CD player TypeType There is no sound when playing a disc TroubleshootingNo lights are displayed when switching on The drawer will not openThere is interference on the radio and/ or television when the CD player is switched on To clean the case, display panel, and keypad MaintenanceCleaning To clean the audio connectionsGuarantee Service and guaranteeService Setting up the CD playerIndex IndexIndex N No disc display O Optical EIAJ output Outputs