JetAudio iAUDIO U2 manual Basic Operations, Power On/Off, Connecting USB Connecting USB Cable

Press and hold Play to turn power off.

16

Basic Operations

Power On/Off, Connecting USB

Basic Operations

1. Power On/Off

•Press and hold PLAY until the “iAUDIO” logo appears and the power comes on.

•Press and hold PLAY again to turn it off (power cannot be turned off during recording or in the USB mode).

•If the AC adapter was connected when you turn it off, the charge window is displayed and iAUDIO goes into Charge mode.

•To use iAUDIO again in the Charge mode, press and hold PLAY again.

•When you set “Auto Off” or “Sleep Timer”, the power automatically turns off.

Press and hold Play. The iAUDIO turns on and displays the logo.

2. Connecting USB

Connecting USB Cable

When you connect the USB cable to the PC while iAUDIO is turned off, used or charged, it enters USB mode. (The recording is automatically stopped if USB cable is connected during recording). When the USB cable is connected, the built-in battery is not used. (Maximum of 500mA is used for the Normal Charge mode and 150mA is used for the Slow Charge mode. Please turn the charge feature off in Menu or change to Slow Charge mode if the PC is unstable due to overload.)

Disconnecting USB Cable

Before disconnecting, make sure that the status has changed to READY on the iAUDIO LCD. DO NOT DISCONNECT USB CABLE when the status is Reading or Writing.

READY. Safe to disconnect. READING WRITING

iAUDIO U2