Hitachi 240353 manual Equipment Misuse Hazard

Page 5

WARNING

EQUIPMENT MISUSE HAZARD

Equipment misuse can cause the equipment to rupture, malfunction, or start unexpectedly and result INSTRUCTIONS in a serious injury.

DThis equipment is for professional use only.

DRead all the instruction manuals, tags, and labels before operating the equipment.

DUse the equipment only for its intended purpose. If you are uncertain about usage, call your Graco distributor.

DDo not alter or modify this equipment. Use only genuine Graco parts and accessories.

DCheck the equipment daily. Repair or replace worn or damaged parts immediately.

DDo not exceed the maximum working pressure of the lowest rated system component. This pack- age has a 100 psi (0.7 MPa, 7 bar) maximum working pressure.

DUse fluids that are compatible with the equipment wetted parts. See the Technical Data section of all the equipment manuals. Read the fluid manufacturer’s warnings.

DRoute the hoses away from traffic areas, sharp edges, moving parts, and hot surfaces. Do not expose Graco hoses to temperatures above 180_F (82_C) or below –40_F (–40_C).

DDo not use the hoses to pull equipment.

DDo not move pressurized equipment.

DWear hearing protection when operating this equipment.

DComply with all applicable local, state, and national fire, electrical, and other safety regulations.

TOXIC FLUID HAZARD

Hazardous fluids or toxic fumes can cause a serious injury or death if splashed in the eyes or on the skin, swallowed, or inhaled.

DKnow the specific hazards of the fluid you are using. Read the fluid manufacturer’s warnings.

DStore hazardous fluid in an approved container. Dispose of the hazardous fluid according to all local, state, and national guidelines.

DWear appropriate protective clothing, gloves, eyewear, and respirator.

DIf the pump diaphragm fails, hazardous fluid may be exhausted along with the air.

308-845 3

Image 5
Contents Contents INSTRUCTIONS-PARTS List 308845 1A 308845 1B Symbols Table of ContentsEquipment Misuse Hazard General Information SetupPreparing the Operator Preparing the SiteHose Connections Assembling the Wall-Mount UnitFlush Pump Before First Use GroundingAdjusting Pump and Gun Air Regulators Using the Gun Pressure Relief ProcedureOperation Systems with Fluid Pressure RegulatorKEY Priming the System See FigRelieve the pressure When to Shut Down the SystemFlushing the System Front Shield Assembly MaintenanceFront Shield Assembly Orderable Parts Back ShieldDescription Qty Parts ListWall-Mount Packages with Fluid Pressure Regulators Grounding Detail Parts DrawingBOLT, U Wall-Mount Packages with Surge TanksGrounding Detail Model No Fluid Filter Kit Accessory Fluid Filter KitWall Mounting Hole Layout Technical DataDimensions Toll Free Graco Standard WarrantyGraco Phone Number