Setup
CAUTION
This equipment is compatible with most
Do not use acid catalyzed materials; they are incom- patible with the acetal used in this pump.
WARNING
TOXIC FLUID HAZARD
Hazardous fluid or toxic fumes can cause serious injury or death if splashed in the eyes or on the skin, inhaled, or
swallowed.
DRead TOXIC FLUID HAZARD on page 3.
DUse fluids and solvents that are compatible with the equipment wetted parts. Refer to the Tech- nical Data section of all equipment manuals.
Read the fluid and solvent manufacturer’s warnings.
General Information
DAlways use Genuine Graco Parts and Accessories, available from your Graco distributor. See the Product Data Sheet for this package, Form No.
DReference numbers and letters in parentheses refer to the callouts in the figures and the parts lists on pages 10 and 12.
Preparing the Operator
Anybody who operates this system should be trained in the safe, efficient operation of all system components. At a minimum, all operators should thoroughly read the safety, setup, and operation sections of this manual.
Preparing the Site
DUse a compressor capable of delivering 40 cfm (1.12 m3) and a minimum of 80 psi (552 kPa, 5.4 bar) for efficient operation.
DClear obstacles and debris that could cause an unsafe operating environment.
DRun a 1/2 in. I.D. air line from your compressed air supply to the pump location. Be sure the air is dry and filtered.
DWhen the
DVentilate the spray booth.
WARNING
To prevent hazardous concentrations of toxic and/or flammable vapors, spray only in a properly ventilated spray booth. Never operate the spray gun unless ventilation fans are operating.
Check and follow all of the national, state, and local codes regarding air exhaust velocity requirements.
4