Chapter 3: NetCommand® Setup and Editing
Edit NetCommand®: Delete Devices
Delete Device Screen
Figure 25
Selecting Delete from the Setup menu, displays the Delete screen. You can choose to delete a single device by selecting the device you would like to delete, or you can delete the entire NetCommand configuration. After you have chosen the device, or the entire configuration, you will be prompted to confirm your choice to delete.
If you select the Entire Configuration, the Initial button becomes available on the Edit NetCommand screen. If you delete a device that you learned the remote control signals for the learned signals are erased.
Setup Reminder Screen
Figure 27
This screen only appears if you did not set up NetCommand when the TV was first turned on. The Setup Reminder screen displays each time you power on the TV for six times.
If you would like to set up NetCommand and/or the TV Guide On Screen system, select Next and press ENTER. If you do not wish to setup NetCommand and/or the TV Guide On Screen system, then select Cancel and press
ENTER.
Refer to the separate TV Guide On Screen Interactive Program Guide System manual for details on using the TV Guide On Screen system and special guide customization instructions.
Figure 25. Delete screen
Figure 27. Setup Reminder screen
Edit NetCommand®: Finish Screen
Figure 26
To finalize your selections and complete the NetCommand setup, select Finish from the Finish screen.
Note: To change any of the inputs or names for the devices, or add devices not included in the initial settings, select Edit to display the Edit NetCommand menu.
Figure 26. Finish screen
46
