Chapter 3: NetCommand® Setup and Editing
Add Devices, continued
IR Code for [Device] Screen
Figure 22
This screen only displays if an added device has the same IR code as a previously added device of the same type and manufacturer. You can specify the IR setting for the new device. For example, for the second Mitsubishi VCR you can specify the IR Code setting to
Figure 22. IR Code for [Device] screen
Edit NetCommand®: Change Devices
Change Device Screen
Figure 24
Selecting Change from the Setup menu screen, displays the Change screen. To change a device, select the device by name, not type. You can change the name or input connections to the media center and A/V receiver. If “Other” is selected for the manufacturer then you can also “Learn.” The rest of the screens that follow are the same as when you Add a device.
Figure 24. Change screen
RF Connection for Cable Screen
Figure 23
The RF Connection screen displays only when adding or changing a Cable Box. If your Cable Box is connected to a media center antenna input, check the RF check box.
Select the antenna input that is used with the Cable Box. Select the channel number used for output by your cable box. The default channel is 003. If the Cable Box is also connected to a VCR for recording, select that VCR.
If your Cable box is connected using Audio/Video cables, make sure the RF check box is unchecked. Then the next screen will be Connection for [Device] screen (Figure 20), to allow the selection of the media center input used with the Cable Box.
Figure 23. RF Connection for Cable screen
IMPORTANT
To delete a device or change connections for a device (like a VCR or a DVD player), you must first switch the TV to a different input device. Press the DEVICE key and select a different input device from the Device Selection menu.
To make changes to the A/V receiver setup, set the current audio source to TV Audio. First press the DEVICE key to verify the current audio source. To change, press the AUDIO key to acess the audio selection window and select TV Audio.
IMPORTANT
NetCommand must be set up and the IR emitters properly placed for your cable box and VCR so the TV Guide On Screen system can control these devices.
45
