Mitsubishi Electronics LT-3780, LT-3280 manual DVD Player or Other Component Video Device,
1MBZFS

Chapter 2: Connecting

DVD Player or Other Component Video Device

Figure 12

Component video cables and audio cables are required. These are not included with the media center.

1.Connect the Component Video cables from Y/Pr/Pb VIDEO OUT on the back of the DVD player to COMP-2 on the media center rear panel, matching the correct connection:

Y to Y (Green), Pr to Pr (Red), Pb to Pb (Blue)

2.Connect a set of audio cables from AUDIO OUT on the back of the DVD player to COMPONENT-1 AUDIO Input on the media center rear panel. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel.

NOTE: For the best audio quality, if your A/V receiver supports digital audio, connect the DVD Coaxial or Optical digital audio directly to the A/V receiver (instead of using the L/R analog audio ports).

.FEJB
$FOUFS

8IJUF	3FE
	
*/		*/



065

		 065					%7% 1MBZFS
		8IJUF		"6%*0 065			#*5453&".1$. .*546#*4)*	"$ */
:	7*%&0		 $) 463306/%	$)
$					-
$		3FE				3
			46#800'&3				$0"9*"- 015*$"-
7*%&0 065

5P
"7
3FDFJWFS
VTJOH
$PBYJBM
PS
0QUJDBM EJHJUBM
BVEJP
DPOOFDUPST
JG
TVQQPSUFE

Figure 12. Connecting a DVD Player with Component Video

NOTE: NetCommand® will assume you connected your DVD player to Component-1. If you add a second DVD or use any other inputs for your DVD, this change must match in the NetCommand system. See Edit NetCommand in Chapter 3 for more information.

IMPORTANT

See Appendix D for component video signal compatibility information.

For digital audio connections, see your DVD Owner’s Guide.

27