Chapter 3: NetCommand® Setup and Editing

Add an A/V Receiver, continued

Name Screen

Figure 11

The Name screen allows you to change the default name for the A/V receiver to a custom name of up to eight characters (including a blank space), selecting from letters, numbers, and nine different characters. Using the media center’s remote, press ADJUST or to select each letter, then press ENTER to move to the next position. Press CANCEL to delete the current letter and move back one character position. When in the first position, the CANCEL button will return the name to the default name.

Finish Screen

Figure 13

To finalize your selections and complete the A/V receiver setup, select Finish from the Finish screen.

Note: If you connected the audio output of any device directly to the A/V Receiver, you must use the “Change” function of the Edit NetCommand menu and select the device to assign the correct A/V Receiver input to be used with each device.

Figure 13. Finish screen

Figure 11. Name screen

Audio Line Out to AVR Screen

Figure 12

If you connected the media center Audio Line Out to an A/V Receiver (AVR), use this screen to select the name of the analog input you’re using on the A/V receiver.

If the A/V receiver also has a digital audio input, then connect the media center Digital Audio Output to the A/V receiver digital audio input.

Note that the media center MONITOR OUTPUT AUDIO connection is only for VCR recording and is not synchronized with the video display. Do not use MONITOR OUTPUT AUDIO as input to an A/V receiver.

Figure 12. Audio Line Out to AVR screen

41

Page 47
Image 47
Mitsubishi Electronics LT-3780, LT-3280 manual Add an A/V Receiver, Name Screen, Audio Line Out to AVR Screen