Mitsubishi Electronics LT-3780, LT-3280 manual Appendix F Using PIP and POP, 101

Appendix F: Using PIP and POP

You can display programs from analog channels, analog inputs or devices as Picture-In-Picture (PIP) and Picture- Outside-Picture (POP). The media center has a second analog tuner for non-scrambled analog channels received on Ant-1 and will display them as the PIP/POP sub-pictures. Digital channels and devices can be shown as the main picture but cannot be the sub-picture. NOTE: PIP, POP and Side-by-Side modes do not support PC input.

Press PIP/POP to activate the PIP/POP option. With each press of the PIP/POP button on the remote control (within seconds of each other), the PIP/POP will cycle through the following display options:

		Side-by-Side
MAIN	Side-by-Side
PICTURE

To turn PIP/POP off:

•Press PIP/POP repeatedly until the TV returns to full-screen mode.

•Press PIP/POP and wait at least 10 seconds. Press PIP/ POP again. The next time you activate PIP/POP, the last- used PIP/POP option will be displayed.

Changing PIP/POP Device

Press PIP DEVICE to change the PIP or POP picture source device. A menu similar to the Device Selection menu will be displayed.

			POP 1
MAIN					3 POP
			POP 2
PICTURE
			POP 3
	POP 1	POP 2		POP 3
MAIN					9 POP
	POP 4	POP 5		POP 6
PICTURE
	POP 7	POP 8		POP 9
Ant-1 2 XXXX			PIP Ant-1 17
Standard
Stereo SAP
TV-PG DLSV
SQV1					PIP large

PIP

Changing PIP/Side-by-Side Channels

Press PIP CH to scroll up and down through memorized channels on Ant-1 and Ant-2.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/POP picture. Pictures from digital channels can only be shown as the main picture.

Moving PIP Image

If no menus are on screen, press ADJUST , , or to move the PIP display anywhere on the main screen.

Automatic POP Switching

When automatic POP switching is active, the TV will cycle through memorized analog channels on Ant-1 or Ant-2 or strobe pictures from other A/V components in the POP display. Press PAUSE to pause or restart automatic POP switching.

Selecting POP “Live” Image

Press ADJUST , , or to select a different POP “live” image (automatic POP switching must be paused.)

Ant-1 2 XXXX	PIP Ant-1 17
Standard
Stereo SAP
TV-PG DLSV
SQV1

PIP

Ant-1 2 XXXX

Standard

Stereo SAP

TV-PG DLSV

SQV1

PIP small

PIP/POP Off

Freezing the PIP and Side-By-Side Picture

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

Side-by-Side mode cannot show the same channel or device on both sides.

If Ant-1 or Ant-2 is the main picture, Ant-2 is not available as a PIP, POP or Side-by-Side.

PIP, POP and Side-by-Side mode are not compatible with signals from memory cards.

PIP, POP and Side-by-Side modes are not compatible with PC input.

101