Mitsubishi Electronics LT-3780 Time Menu, Setting the Clock, Manual, Timer On/Off, Set Time, Auto

Chapter 5: Using the TV Menu

Time Menu

Setting the Clock

You may choose to manually or automatically set the clock that your media center will use for recording or timer functions. You cannot schedule recordings if the clock is not properly set.

Manual

Figure 16

To manually set the clock, you need to select the current time, including AM or PM, current date, time zone for your area and the Daylight Savings time setting.

Figure 16. Time Menu, Manual Clock Setting

Set Time

Press ADJUST or repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST or to select minutes, then press ENTER to select AM or PM.

Set Date

Press ADJUST or to select the correct date.

Time Zone

Select your correct time zone. Press ADJUST or to select the time zone (Atlantic, Eastern, Central, Mountain, Pacific, Alaska or Hawaii) for your area. Then press ADJUST to move to the Daylight Savings time option.

will automatically retrieve the correct time and date information from this channel. Be aware that if a channel displays incorrect time information, it is because of information sent from the broadcaster and is not a defect of the media center.

Timer On/Off

Figure 17

The timer can be turned to On or Off. When On, you need to select the time and day to turn the TV On and the device and channel to display. With the TV off and the timer active, the blue POWER LEDs on the front of the display and media center blink slowly as reminders. At your preselected time, the timer will turn the TV on, and this message will be displayed: “Press a button for the media center to stay on.” Press any button on the remote control within 5 minutes or the TV will turn itself off.

Figure 17. Timer Menu (Timer On/Off)

Set Time

Press ADJUST or repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST or to select minutes, then press ENTER to select AM or PM.

Set Day

Select the day or days that the media center will turn on automatically. Press ADJUST or to select Everyday, Mon-Fri (Monday through Friday), or the individual days of the week.

Daylight Savings Time

Select the Daylight Savings time (DST) option that your state uses. Press ADJUST or to select Applies if your state or area uses DST, or Ignore if DST does not apply.

Auto

Select the Time Zone and Daylight Savings time setting, as noted above. You may then tune to a channel (on Ant-1 or Ant-2) that uses Extended Data Service (XDS) time data, typically a PBS channel. The Auto selection

Device

Press ADJUST or to select the device to use when the timer turns on media center. If the media center is already on, the timer select this pre-selected device.

Channel

When an antenna is the selected device, you may select any memorized channel. Press ADJUST or to select the channel and the media center will tune to this channel in memory when the timer turns it on. This includes sub-channels for digital choices.

71