Mitsubishi Electronics LT-3780 AC Power Cords, JTQMBZ .FEJB
$FOUFS $
8BMM 0VUMFU, Connecting

Chapter 2: Connecting

AC Power Cords

Figure 3. AC power cords for display and media center

After you have connected all A/V devices to the media center, connect the display to a nearby AC wall outlet, then connect the media center to a AC wall outlet. The blue light next to the Power button on the front panel of the media center will start blinking. Wait for the blinking to stop (about 1 minute) before pressing the Power button on the remote control.

NOTE: After a power outage (or after the media center power cord has been accidentally unplugged), the blue light on the front of the media center will start to blink.

•This is normal; the media center is re-initializing.

•Wait for the blue light to stop blinking (about 1 minute), then press Power on the remote control.

"$
8BMM

0VUMFU

IMPORTANT: Do not connect power cords to AC outlets until AFTER all A/V devices are connected. Instructions for connecting A/V devices are provided in this chapter.

%JTQMBZ .FEJB
$FOUFS

"$
8BMM

0VUMFU

Figure 3. Connecting display and media center power cords to AC wall outlets. Wait until after you have connected all A/V devices to the medial center before plugging in the AC power cords.

19