Mitsubishi Electronics LT-3780 manual Appendix D Input Connection Compatibility, Hdmi Input Levels

Appendix D: Input Connection Compatibility

Component-1 and Component 2 Inputs

These inputs are compatible with component video signals from standard DVD players and other equipment sending a standard NTSC component video signal (480i). These inputs are also compatible with newer DVD players sending a progressive NTSC component video signal (480p). These inputs are also compatible with most standard DTV and satellite receivers with component video outputs (YPbPr). Compatible DTV signals are SDTV 480i, 480p, 720p and HDTV 1080i.

Component 1 and 2 Input Levels and Timings

EIA - 770.1 and EIA - 770.2 Standard Levels & Timing

Y = 1.0Vp-p (includes sync) 75ohm

Pb = 700mVp-p, 75ohm (can also receive signals from outputs labeled B-Y and Cb)

Pr = 700mVp-p, 75ohm (can also receive signals from outputs labeled R-Y and Cr)

VGA Input (on rear panel of display)

This input will accommodate most computers capable of supporting a VGA monitor. See page 85 for supported PC timings.

NetCommand® IEEE 1394 System Compatibility

The supplied LCD Flat Panel HDTV is designed to conform to IEEE 1394 AV/C software standards in effect at the time of development. This exciting new networking and control technology is designed to provide high-performance digital connections and product control, making products easier to use.

As other manufacturers produce products that use IEEE 1394 AV/C, they will be responsible for the development of their products to meet the standards of the technology, as well as compatibility testing with other products. Mitsubishi cannot be responsible for their efforts, and therefore cannot promise compatibility with these other products. Any compatibility problems with other manufacturers products should be brought to the attention of those manufacturers.

HDMI Input Levels

NTSC 480i only

Y = 1.0Vp-p (includes sync) 75ohm

C = 0.286 Vp-p (burst signal), 75 ohm

99