Mitsubishi Electronics LT-3780 DVI Output Device, Connecting, Fejb
$Foufs 
Vejp
, 7*
%FWJDF

Chapter 2: Connecting

DVI Output Device

Figure 14

A DVI-to-HDMI cable or DVI/HDMI adaptor and HDMI cable and audio cables are required. These are not included with the media center. They may be available at your local electronics retailer.

1.Connect the DVI-to-HDMI cable (recommended) (or DVI/HDMI adaptor with an HDMI cable) from the DVI device’s rear panel to the media center’s rear panel.

NOTE: If you are using a DVI/HDMI adaptor, it is important to connect the adaptor to the DVI side for best performance.

2.Connect a set of audio cables from AUDIO OUT on the the DVI device rear panel to the DVI Analog Audio input on the media center rear panel. The red cable connects to the R (right) channel, and the white cable connects to the L (left) channel.

NOTE: The HDMI connection supports copy protection (HDCP). Some devices require connecting to an analog input first, in order to view on-screen menus and select DVI as the ouput. Please review your equipment instructions for DVI connectivity and compatibility.

%7*UP)%.*
$BCMF



)%.*
*/

!.4 3!4%,,)4%

#!",%

.FEJB
$FOUFS 
"VEJP
*/



%7*
065

				 "VEJP */
		,,
$6)6/54	2'"'/54	!5$22)/
		466/54

%7*
%FWJDF

-3
"OBMPH
"VEJP
$BCMF

Figure 14. Connecting a DVI Device

NOTE: The HDMI™ input terminals are compliant with the EIA-861 Standard and are not intened for use with personal computers.

IMPORTANT

The HDMI/DVI connection does not support audio. For audio, you must connect left and right analog audio cables.

29