Honeywell MAXPRO-NET manual Using Key To Move To Entry

3.7 CHANGING THE DWELL PERIOD, CONTINUED

Use the key to move backwards in the scan sequence. Continue pressing the

key until the beginning of the scan sequence list is reached (that is, before Entry (1)).

Entry position in Scan Sequence	0		1	2	3	4	5
Camera No.	dwell		2	25	12	29	14
	period
Current entry position selected	*
Table 3.10: Using The		Key To Move To Entry (0).

The message:

will be displayed briefly, together with the current dwell setting (in seconds). The valid dwell period is (01 Ù 99) seconds.

Now, enter the new dwell period:

•for example, .. new Dwell = 15 seconds.

•or .. new Dwell = 3 seconds.

To start the scan sequence running again, press the key once. The message:

will be displayed briefly. Scan sequence 20 is now running.

Rev. A	3-12	HMXMU001056
		03/16/05