8.4PAN-TILT CONTROL

 

Message Prompt

Explanation

 

 

 

 

 

 

 

 

 

 

 

 

 

Fixed camera

This camera does NOT have any PTZ capability.

 

 

 

 

 

 

 

Not while scanning

Before controlling the PTZ camera on this monitor the current scan

 

 

 

sequence must be halted.

 

 

 

 

 

 

 

PTZ denied

The keyboard operator does not have access to control this PTZ

 

 

 

camera.

 

 

 

 

 

 

 

PTZ busy

Another keyboard operator is currently controlling this camera

 

 

 

PTZ.

 

 

 

 

 

 

 

PTZ locked

All of the camera PTZ control functions have been locked. The

 

 

 

PTZ cannot be controlled until it is unlocked.

 

 

 

 

 

 

 

PTZ site failed

The camera PTZ site receiver has failed. The camera cannot be

 

 

 

controlled until the PTZ site receiver recovers.

 

 

 

 

 

 

 

 

Ctrl config. error

The PTZ (or VCR) control definition has been incorrectly

 

 

 

 

configured. Control of this device is not possible until it is properly

 

 

 

defined in the system.

 

 

 

 

 

 

 

No pan

This PTZ camera does not support the pan left/right control

 

 

 

functions.

 

 

 

 

 

 

 

No tilt

This PTZ camera does not support the tilt up/down control

 

 

 

functions.

 

 

 

 

 

 

 

No focus

This PTZ camera does not support control of lens focus.

 

 

 

 

 

 

No Zoom

This PTZ camera does not support control of lens zoom.

 

 

 

 

 

 

 

No iris control

This PTZ camera does not support manual iris control.

 

 

 

 

 

 

 

No wash/wipe

This PTZ camera does not support wash and wipe control.

 

 

 

 

 

 

No flashback

This PTZ camera does not support the FLASHBACKcontrol

 

 

 

function.

 

 

 

 

 

 

 

 

No views

This PTZ camera does not support preset views.

 

 

 

 

 

 

 

<PTZ aux>

This prompt confirms the SHIFT to the auxiliary PTZ control

 

 

 

functions available from the lens keys on the RD-500 control

 

 

 

keyboard for control of wash, wipe and manual-iris.

 

 

 

 

 

 

 

 

<Open>

The PTZ camera manual iris is opening.

 

 

 

 

 

 

 

 

<Close>

The PTZ camera manual iris is closing.

 

 

 

 

 

 

 

 

<Wash>

The wash function of the PTZ is operating.

 

 

 

 

 

 

 

 

<Wipe>

The wipe function of the PTZ is operating.

 

 

 

 

 

 

 

<Flashback>

The PTZ camera FLASHBACKfunction has been operated.

 

 

 

 

 

 

Moving to view (xx)

The PTZ camera is moving to the selected preset view (xx).

 

 

 

 

 

 

Set view (00-99)

Enter the PTZ camera preset view number to be set (two digits).

 

 

 

 

 

 

Rev. A

8-5

HMXMU001056

 

 

 

03/16/05

Page 67
Image 67
Honeywell MAXPRO-NET manual PAN-TILT Control