Honeywell MAXPRO-NET manual Delete a Macro, Can I Edit a MACRO?

4.4DELETE A MACRO

,Access denied to some operators

A macro must be deleted before it can be redefined. Press the key followed

by the key. The prompt:

will be displayed. Now, select the two-digit macro number you wish to delete. Valid MACRO's are (00 Ù 99).

•for example, .. deletes macro (65).

•or .. deletes macro (00).

The message prompt;

will then be displayed briefly. Your macro is now deleted. It is ready to be defined again.

4.4CAN I EDIT A MACRO?

NO. A macro recording cannot be edited. The only way to correct or modify a macro is to make it again.

To minimize errors during recording, design the macro on paper first, documenting the exact sequence of keystrokes required. Then, manually execute your designed macro on the keyboard while watching the effect of each keystroke.

CAUTION: Remember that some keystrokes like camera selections (or PTZ view recall) may not make any noticeable change to the monitor as it may already be displayed (or at that view position).

Rev. A	4-5	HMXMU001056
		03/16/05