3.2STARTING A SCAN SEQUENCE

Firstly, a monitor must be selected.

Press the key, followed by the scan sequence number required. Valid scan sequence numbers are (01 Ù 99).

for example, .. selects scan sequence 21 and starts it running.

or .. selects scan sequence 5 and starts it

running. The key is required because the valid range is (01 Ù 99).

The monitor will now be displaying cameras from the scan sequence list. The following message would be briefly displayed.

Every time the scan sequence selects a new camera, the associated camera description text will also be displayed.

CAUTION: To manually select a camera, the scan sequence must be halted.

Rev. A

3-2

HMXMU001056

 

 

03/16/05

Page 26
Image 26
Honeywell MAXPRO-NET manual Starting a Scan Sequence