8.8GENERAL

 

Message Prompt

Explanation

 

 

 

 

 

 

 

 

 

 

 

No alarm present

You pressed the alarm clear key but there are no alarms currently

 

 

 

displayed on this monitor.

 

 

 

 

 

 

 

Busy-please wait

The MAXPRO-Net Server is updating the disk storage files with

 

 

 

your scan sequence, user macro or other changes. This could

 

 

 

take several seconds before normal control of the system is

 

 

 

restored.

 

 

 

 

 

 

 

Busy-using PTZ

Another keyboard/operator is controlling this PTZ camera.

 

 

 

 

 

 

 

Busy-using VCR

Another keyboard/operator is controlling this VCR.

 

 

 

 

 

 

 

 

Busy-using CTRL

Another keyboard/operator is controlling this device.

 

 

 

 

 

 

 

Request PTZ

Another keyboard/operator (of lower priority) wishes to control this

 

 

 

PTZ camera. Please hurry up and release control of this camera

 

 

 

as soon as possible.

 

 

 

 

 

 

 

Request VCR

Another keyboard/operator (of lower priority) wishes to control this

 

 

 

VCR. Please hurry up and release control of this VCR as soon as

 

 

 

possible.

 

 

 

 

 

 

 

Request CTRL

Another keyboard/operator (of lower priority) wishes to use this

 

 

 

device. Please hurry up and release control of this device as soon

 

 

 

as possible.

 

 

 

 

 

 

 

Press <menu> key

This keyboard is not signed-on yet. Press the <MENU> key to

 

 

 

sign-on as a new operator. Pressing any other key on the

 

 

 

keyboard will generate this message prompt.

 

 

 

 

 

 

 

Printer <no paper>

The hard-copy status printer is out of paper. The printer paper

 

 

 

must be replaced immediately to avoid loss of report information.

 

 

 

 

 

 

Printer <off line>

The hard-copy status printer is off-line. Restore the printer to on-

 

 

 

line immediately to avoid losing report information.

 

 

 

 

 

 

 

Keyboard time-out

The keyboard has not been used for a period of time. It has now

 

 

 

been forced away from the selected monitor to allow other

 

 

 

operators to use that monitor. The keyboard is not signed off.

 

 

 

 

 

 

Menu time-out

The system MENU was selected onto this monitor. As it was not

 

 

 

used for the last 30 seconds, it has been cleared down to allow

 

 

 

other operators to use the system MENU.

 

 

 

 

 

 

 

Key disabled

This key on the keyboard has been disabled for this operator. The

 

 

 

key function pressed is not available to you.

 

 

 

 

 

 

 

Op (xx) signed-off

This prompt confirms that you have been signed-off the keyboard.

 

 

 

 

 

 

Sign-on confirmed

This prompt confirms that you have been signed-on to this

 

 

 

keyboard.

 

 

 

 

 

 

 

No menu defined

No system MENU has been defined for this system configuration.

 

 

 

The system MENU cannot be accessed.

 

 

 

 

 

 

 

Monitor in use

The system MENU cannot be selected to a monitor while another

 

 

 

keyboard is also selecting the same monitor. Move to a different

 

 

 

monitor and try again.

 

 

 

 

 

 

 

Rev. A

8-8

HMXMU001056

 

 

 

03/16/05

Page 70
Image 70
Honeywell MAXPRO-NET manual General