Honeywell MAXPRO-NET Message Prompt Explanation End of tour, Tour halted, Tour paused, Set tour

8.3 SCAN, CONTINUED

Message Prompt	Explanation
End of tour	The end of the guard tour sequence has been reached. The tour
	has been halted.
Tour halted	The guard tour sequence has been manually halted. You can now
	manually select cameras to the monitor.
Tour paused	The guard tour is now paused. You can now step manually
	forwards and backwards through the sequence.
Set tour	The guard tour is now in SET mode. It can now be edited.
Inserted entry	This prompt confirms that a new entry has been inserted into the
	scan sequence. All entries from this point forward have moved up
	by one entry position.
Sequence full	The scan sequence is already full. All 99 entries have been used.
Deleted entry	This prompt confirms that an entry has been deleted from the scan
	sequence. All entries from this point forward have moved down by
	one entry position.
Sequence empty	All entries have been deleted from the scan sequence. Entry (01)
	still remains as a scan sequence always has at least one camera
	entry.
Seq (xx) entry =yy	The camera selection for this entry position (yy) in the scan
	sequence (xx) is being displayed. It cannot be changed as the
	scan sequence is not in SET mode.
(xx) Set entry =yy	The camera selection for this entry position (yy) in the scan
	sequence (xx) is being displayed. As this scan sequence is in SET
	mode, a new camera selection for this entry position (yy) can now
	be entered.
Cameras only	Only cameras can be entered into a scan sequence. VCRs and
	other devices are not permitted.
Dwell in (sec)	The text on-screen now displays the dwell period for this scan
	sequence. If in SET scan mode, you can enter the new dwell
	period (01-99) seconds.
Seq (xx) dwell =yy	This message displays the current dwell period (yy) in seconds, for
	this scan sequence (xx). It cannot be changed as the scan
	sequence is not in SET mode.
(xx) Set dwell = yy	This message displays the current dwell period (yy) in seconds, for
	this scan sequence (xx). As this scan sequence is in SET mode,
	the new dwell period (01-99 seconds) can now be entered (two
	digits).

Rev. A	8-4	HMXMU001056
		03/16/05