GPS Enabled

To change your GPS PIN:

1From the main menu, select Settings > Security > Change Password > GPS PIN.

2Enter the current GPS PIN.

Note: When you receive your phone, your GPS PIN is 0000.

3Press A under Ok.

4Enter the new 4- to 8-digit GPS PIN.

5Press A under Ok.

6Enter the new 4- to 8-digit GPS PIN to confirm.

7Press A under Ok.

Using GPS with Map Software

You can use the GPS feature of your phone to provide approximate location data to a laptop computer or similar device that is running interactive map software such as that made by DeLorme or Microsoft. This way, if your phone has good access to GPS signals, your approximate position on a map can be made available as you travel in a vehicle.

To do this, connect your phone to your laptop (or other device) with a data cable and set your phone to transmit data (see “Getting Started” on page 101). Your phone then provides your approximate location to the device running the map software,

which displays your location on a map. Your phone provides an updated location every second and the map software displays your changing location on its map.

See “Enhancing GPS Performance” on page 96 for more details on obtaining good location information.

Note: Because your phone is continuously determining your location, using the GPS feature of your phone with map software uses the phone’s battery power quickly.

Software Compatibility

Your phone sends location information to your laptop or other device using the standard National Marine Electronics Association (NMEA) format. Your phone supports output messages in NMEA-0183 format and supports the following NMEA-0183 sentences: GGA, GLL, GSA, GSV, RMC, and VTG.

The map software running on your laptop or other device must support NMEA 3.0.

100

Page 110
Image 110
Motorola I560BLKSPT manual Using GPS with Map Software, Software Compatibility