Using a Headset
If you use a headset or similar device with your phone, you can set your phone to send incoming sound to the headset only, or to the headset and the speaker at the same time:
1From the main menu, select Settings > Advanced > Headset/Spkr.
2Select HdsetOnly to send incoming sound to the headset only.
Select Hdset&Spkr to send incoming sound to the headset and ring tones to the speaker.
Note: If you are using your phone with a headset, and you have the Flip to End option set to On, closing your flip sends incoming sound to the headset and does not end the call. See “Setting Flip Actions” on page 49.
Attaching a Headset
1Lift the audio jack cover.
2Insert the headset connector firmly into the audio jack. You may have to rotate the headset connector until it fits securely into the audio jack.
Using a Remote PTT Button
If you are using a headset or other accessory with a remote PTT button, you can use the remote PTT button for phone calls, Private calls, group calls, and SDG calls*.
For phone calls, use the remote PTT button to answer calls, switch between calls, and end calls. Hold the remote PTT button for less than 2 seconds to answer calls and switch between calls. Hold the remote PTT button for more than 2 seconds to end calls.
For Private calls, group calls, and SDG calls*, use the remote PTT button as you would the PTT button on your phone.
Note: When using a headset, the PTT button on your phone works the same way as when you are not using a headset. Sounds associated with Private calls, group calls, and SDG calls* are heard through the headset.
*Selective Dynamic Group Calling (SDGC) may not be offered by your service provider.
122
