Philips MPC220SL/17, MPC225SL important safety instructions EL 6474-E003 01/6, Controls see figure

12 V DC

MPC220SL/17 8/6/02 9:20 AM Page 1

User guide

S M A R T . V E R Y S M A R T .

MPC220SL

MPC225SL

PORTABLE CD PLAYER

			O	RT
				A
Read this manual first!		P			NT
		M
	I		Return		!
If you have any problems, do not attempt
	your Warranty
to return this product to the store.	Registration Card
For fast help, call us first!	within 10 days

Return your Warranty Registration card today to ensure you receive all the benefits you’re entitled to.

• Once your Magnavox purchase is regis-	• So complete and return the Warranty
tered, you’re eligible to receive all the	Registration Card enclosed with your
privileges of owning a Magnavox product.	purchase at once, and take advantage
	of these important benefits.

	Warranty		Owner		Model
Verification		Confirmation		Registration
Registering your product		Your completed		Returning your Warranty
within 10 days confirms		Warranty Registration		Registration Card right
your right to maximum		Card serves as verifica-		away guarantees you’ll
protection under the		tion of ownership in the		receive all the information
terms and conditions of		event of product theft		and special offers which
your Magnavox warranty.		or loss.		you qualify for as the
				owner of your model.

IMPORTANT SAFETY INSTRUCTIONS

1.	Read these instructions.	11.Refer all servicing to qualified service personnel. Servicing
2.	Keep these instructions.	is required when the apparatus has been damaged in any way,
		such as power-supply cord or plug is damaged, liquid has been
3.
	Heed all warnings.	spilled or objects have fallen into the apparatus, the apparatus
4.	Follow all instructions.	has been exposed to rain or moisture, does not operate nor-
		mally, or has been dropped.
5.
	Do not use this apparatus near water.	12.Battery usage CAUTION – To prevent battery leakage
6.	Clean only with dry cloth.
		which may result in bodily injury or damage to the unit:
7.	Do not block any ventilation openings. Install in	● Install all batteries correctly, + and - as marked on the unit.

LIMITED WARRANTY

PORTABLE AUDIO

90 Days Free Exchange

This product must be carried in for an exchange.

WHO IS COVERED?

You must have proof of purchase to exchange the product. A sales receipt or other doc- ument showing that you purchased the product is considered proof of purchase. Attach it to this owner’s manual and keep both nearby.

WHAT IS COVERED?

Warranty coverage begins the day you buy your product. For 90 days thereafter, a defec- tive or inoperative product will be replaced with a new, renewed or comparable product at no charge to you. A replacement product is covered only for the original warranty period.When the warranty on the original product expires, the warranty on the replace- ment product also expires.

WHAT IS EXCLUDED?

Your warranty does not cover:

• labor charges for installation or setup of the product, adjustment of customer controls

on the product, and installation or repair of antenna systems outside of the product.

BEFORE REQUESTING EXCHANGE…

Please check your owner’s manual before requesting an exchange. Adjustments of the controls discussed there may save you a trip.

EXCHANGING A PRODUCT IN U.S.A.,

PUERTO RICO, OR U.S.VIRGIN ISLANDS…

Contact 1-800-705-2000 to arrange an exchange. Or, ship the product, insured and freight prepaid, and with proof of purchase enclosed, to the address listed below.

Magnavox Exchange Program

Suite A

406 North Irish Street

Greeneville TN 37745

(In U.S.A., Puerto Rico, and U.S.Virgin Islands, all implied warranties, including implied war- ranties of merchantability and fitness for a particular purpose, are limited in duration to the duration of this express warranty. But, because some states do not allow limitations on how long an implied warranty may last, this limitation may not apply to you.)

EXCHANGING A PRODUCT IN CANADA…

Please contact Magnavox at:

1-800-661-6162 (French Speaking)

1-800-705-2000 (English or Spanish Speaking)

7			6
			5
8			4
			4
	9	4	3
9
0			2
	L
!	INEO
	UT/
@	VOL		1
			OPEN

1-800-705-2000	S			E
	E	E	ID
			W H Y INS

Know these

ssaaffeettyy symbols

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

This “bolt of lightning” indicates uninsulated material

within your unit may cause an electrical shock. For the safety of everyone in your household, please do not remove product covering.

The “exclamation point” calls attention to features for which

you should read the enclosed litera- ture closely to prevent operating and maintenance problems.

FororCustomerUse

EnterEnterbelowthetheSerialNo..which is locatedononthetherearofofthecabinet. Retain

thisthisinformationinf forfuturereference.

ModelModelNoNo. ._____________________

Serial No. ______________________

Serial No. ______________________

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION: To prevent electric shock, match wide blade of plug to wide slot, and fully insert.

MAC5097

accordance with the manufacturer´s instructions.		●	Do not mix batteries (old and new or carbon and
8. Do not install near any heat sources such as radiators,
			alkaline, etc.).
heat registers, stoves, or other apparatus (including amplifiers)		●	Remove batteries when the unit is not used for a long time.
that produce heat.
9. Only use attachments/accessories specified by the man-			EL 6474-E003: 01/6
ufacturer.
10.	Use only with the cart, stand, tripod, bracket,
	or table specified by the manufacturer or sold with
	the apparatus. When a cart is used, use caution
	when moving the cart/apparatus combination
	to avoid injury from tip-over.

• product repair and/or part replacement because of misuse, accident, unauthorized

repair or other cause not within the control of Magnavox.

• reception problems caused by signal conditions or cable or antenna systems outside

the unit.

• a product that requires modification or adaptation to enable it to operate in any coun-

try other than the country for which it was designed, manufactured, approved and/or

authorized, or repair of products damaged by these modifications.

• incidental or consequential damages resulting from the product. (Some states do not

allow the exclusion of incidental or consequential damages, so the above exclusion

may not apply to you.This includes, but is not limited to, prerecorded material,

whether copyrighted or not copyrighted.)

• a product used for commercial or institutional purposes.

WHERE IS EXCHANGE AVAILABLE?

You may exchange the product in all countries where the product is officially distributed by Magnavox. In countries where Magnavox does not distribute the product, the local Magnavox service organization will attempt to provide a replacement product (although there may be a delay if the appropriate product is not readily available).

Magnavox, P.O. Box 520890, Miami,

FL 33152, USA, (402) 536-4171

(In Canada, this warranty is given in lieu of all other warranties. No other warranties are expressed or implied, including any implied warranties of merchantability or fitness for a particular purpose. Magnavox is not liable under any circumstances for any direct, indi- rect, special, incidental or consequential damages, howsoever incurred, even if notified of the possibility of such damages.)

REMEMBER…

Please record below the model and serial numbers found on the product. Also, please fill out and mail your warranty registration card promptly. It will be easier for us to notify you if necessary.

MODEL # ___________________________________________

SERIAL # ___________________________________________

This warranty gives you specific legal rights.You may have other rights

which vary from state/province to state/province.

EL6516T001 / 5-02

#

LASERCLASS 1

PRODUCT

$$

1

Meet Magnavox at the Internet

http://www.magnavox.com

English CONTROLS / POWER SUPPLY

POWER SUPPLY / GENERAL INFORMATION GENERAL INFORMATION / CD PLAY CD PLAY / FEATURES FEATURES FEATURES / TROUBLESHOOTING

English

Español

CONTROLS ( see figure 1 )
1 OPEN 2		..............opens the CD lid
2	°	skips and searches CD tracks backwards
3	¤	skips and searches CD tracks forwards
4 DBB		switches the bass enhancement on and off. This button also
		switches acoustic feedback (the beep) on/off when it is
		pressed for more than 2 seconds

Mains adapter (supplied or optionally available)

Use only a 4.5 V adapter (300 mA direct current, positive pole to the center pin). Any other kind of adapter may damage the player.

1Make sure the local voltage corresponds to the power

adapter’s voltage.

2 Connect the power adapter to the 4.5V DC jack of the player and to the wall outlet.

In-car use (connections supplied or optionally available)

Only use a 4.5 V DC car voltage converter (positive pole to the center pin) and cassette car adapter. Any other converter may damage the set.

1Put the set on a horizontal, vibration-free and stable surface. Make sure it is

in a safe place, where the set is neither a dan- ger nor an

obstacle to the driver and the passengers.

Playback information

• If a CD-Recordable (CD-R) or a CD-Rewritable (CD-RW) is not recorded

properly, nF dISC is displayed, indicating that the CD has not been

finalized. In that case, use FINALIZE on your CD recorder to complete the

recording.

• When playing a CD-Rewritable (CD-RW), please note that it takes 3–15

seconds after pressing 2; for sound reproduction to start.

Programming track numbers

You can store up to 30 tracks to play in a program. A single track may be stored more than once in the program.

1 While playback is stopped, select a track with

° or ¤. 4

RESUME and HOLD

You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions.

L INE OU T /

5 PROG ...................programs tracks and reviews the program

6............................display

7 MODE	selects the different playing possibilities: SHUFFLE,
	SHUFFLE REPEAT ALL, REPEAT, REPEAT ALL and SCAN
8 9	stops CD play, clears a program or switches the player off
9 2;	switches the player on, starts or pauses CD play
0 RESUME	stores the last position of a CD track played
HOLD	locks all buttons
OFF	switches RESUME and HOLD off
! LINE OUT/p	3.5 mm headphone jack and LINE OUT jack to connect the
	player to another audio input of an additional appliance.
@ VOL E	adjusts the volume

Note: Always disconnect the adapter when you are not using it.

Environmental information

•All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into two materials: cardboard (box) and polyethylene (bags, protective foam sheet).

•Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, dead batteries and old equipment.

2 Plug the voltage converter into the
cigarette lighter jack (only for 12 V car
battery, negative grounding), then connect
the wired end with 4.5V DC input jack on the	9	44	4,5 V DC
set.

3	If necessary, clean the cigarette lighter jack to
	obtain a good electrical contact.
4	Turn down the volume and connect the cassette adapter plug to LINE OUT/p
	on the set.
5	Carefully insert the cassette adapter into the car radio’s cassette compartment.
6	Make sure the cord does not hinder your driving.

• Playback will stop if you open the CD lid.

• While the CD is read, 01 --:--flashes in the display.

Volume and bass

Volume adjustment

• Adjust the volume by using VOL E.

Bass adjustment

• Press DBB to switch the bass enhancement on or

off	D B B
yDBB appears if the bass enhancement is

2Press PROG to store the track.

yPROG lights up; the track number programmed and P with the total number of stored tracks are displayed.

3Select and store all desired tracks in this way.

4Press 2; to start playback of your selected tracks. yPROG is shown and playback starts.

•You can review the program by pressing PROG for

more than 2 seconds.

yThe display shows all the stored tracks in sequence.

E S P PROG

E S P

1 Switch the slider to RESUME during playback to acti-	E S P
vate RESUME.	RESUME
yRESUME is shown.

2Press 9 whenever you want to stop playback.

3Press 2; whenever you want to resume playback.

yRESUME is shown and playback continues from where you have stopped.

•To deactivate RESUME, switch the slider to OFF. yRESUME goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when

CLASS 1

LASER PRODUCT

Printed in China

QUICK START ENCENDIDO RAPIDO

1 2 p

# 4.5V DC jack for external power supply

$............................type plate

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure.

Batteries (supplied or optionally available)

You can use the following batteries with this CD-player:

•normal batteries type LR6, UM3 or AA (preferably Philips), or

•alkaline batteries type LR6, UM3 or AA (preferably Philips).

Both the model number and production number are located on the

bottom of the set.

CD player and CD handling

• Do not touch the lens Aof the CD player.
•	Do not expose the unit, batteries or CDs to humidity, rain, sand or excessive
	heat (caused by heating equipment or direct sunlight).
•	You can clean the CD player with a soft, slightly

7 Decease the volume on the set, if necessary. Start playback on the set and

adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter jack- when the set is not in use.

Note: If your car radio has a LINE IN jack, it is better to use it for the

car radio connection instead of the cassette.adapter. Connect the signal lead to this LINE IN jack and to LINE OUT/p on the set.

Playing a CD

This CD-player can play all kinds of Audio Discs such

as CD-Recordables and CD-Rewritables. Do not try to play a CD-ROM, CDi, VCD, DVD or computer CD.

activated.

Selecting a track and searching

Selecting a track during playback

• Briefly press ° or ¤ once or several times to skip to the current, previous or

next track.

y

Notes: – If you press PROG and there is no track selected, SELECt is dis- played.

– If you try to store more than 30 tracks, FULL is displayed.

Clearing the program

• While playback is stopped, press 9	to clear program.	E S P	PROG
yCLEAr is displayed once, PROG goes off, and

the program is cleared.

Note: The program will also be cleared if the power supply is interrupted, or if the CD-player lid is opened, or if the set switches off automatically.

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track.

1 Press MODE during playback as often as required in

transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions.

1 Switch the slider to HOLD to activate HOLD.	E S P HOLD
yAll buttons are locked. HoLd is shown when

you press any button. If the set is switched off, HOLD will be shown only when 2; is pressed.

2To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME, you will be acti- vating the RESUME function.

Troubleshooting

WARNING: Under no circumstances should you try to repair the set yourself as this will invalidate the warranty. If a fault occurs, first check the points listed, before taking the unit for repair. If you are unable to solve a problem by following

2.	VOL	OPEN
1.

3#

	4
9	4

4 HOLD ➟ OFF		5 PLAY 2;	6 VOL
	4
9	4

VOL OPE N

!!!

9 44

9 44 9 44

Notes:– Old and new or different types of batteries should not be combined.

–Remove batteries if they are empty or if the player is not going to be used for a long time.

Inserting batteries

1Push OPEN 2 to open the CD lid.

2 Open the battery compartment and insert either 2 normal or alkaline batteries.

Battery indication

The approximate power level of your batteries is shown in the display.

Battery full

Battery two-thirds full

Battery one-third full

Battery dead or empty.When the batteries are dead or empty, the symbol A flashes,

bAtt is displayed, and the beep tone sounds repeatedly..

Batteries contain chemical substances, so they should be disposed of properly.

dampened, lint-free cloth. Do not use any cleaning agents as they may have a corrosive effect.

• To clean the CD, wipe it in a straight line from the

center toward the edge using a soft, lint-free cloth. A cleaning agent may damage the disc! Never write on a CD or attach a sticker to it.

• The lens may cloud over when the unit is moved sud- denly from cold to warm surroundings. Playing a CD is

not possible then. Leave the CD player in a warm environment until the mois- ture has evaporated.

•Active mobile phones in the vicinity of the CD player may cause malfunctions.

•Avoid dropping the unit as this may cause damage.

Headphones

•Connect the supplied headphones to the LINE OUT/p jack of the player.

Note: LINE OUT/p can also be used for connecting the player to your HiFi system (with a signal lead) or to your car radio (with a cas-

sette adapter or signal lead). In both cases, the vol- ume of the player must be set to position 8.

IMPORTANT!

Hearing safety: Do not play your headphones at a high vol- ume. Hearing experts advise that continuous use at high vol-

ume can permanently damage your hearing.

Traffic safety: Do not use headphones while driving a vehicle. It may create a hazard and it is illegal in many countries. Even if your headphones are an open-air type designed to let you hear outside sounds, do not turn up the volume so high that you cannot hear what is going on around you.

1Push the OPEN 2 slider to open the player.

2Insert an audio CD, printed side up, by pressing the CD onto the hub.

3Close the player by pressing the lid down.

4Press 2; to switch the player on and start playback. yThe current track number and elapsed playing

time are displayed.

•You can pause playback by pressing 2;.

yThe time at which playback was paused starts flashing.

•You can continue playback by pressing 2; again.

5Press 9 to stop playback.

yThe total number of tracks and the total playing time of the CD are displayed.

6Press 9 again to switch the player off.

•To remove the CD, hold it by its edge and press the hub gently while lifting the CD.

Note: If there is no activity, the set will automatically switch off after a while to save energy.

	4
9	4

E S P

E S P

Playback continues with the selected track, and

the track’s number is displayed.

4

Selecting a track when playback is stopped 9 4

1Briefly press ° or ¤ once or several times to select the desired track. The track number is displayed.

2Press 2; to start CD play.

yPlayback starts with the selected track.

Searching for a passage during playback

1Keep ° or ¤ pressed to find a particular passage in

a backward or forward direction.

ySearching starts while playback continues at low volume. After 2 seconds the search speeds up.

2Release the button when you reach the desired passage. yPlayback continues from this position.

Notes: – If the player is in SCAN mode (see MODE chapter), searching is not possible.

–In shuffle, shuffle repeat all or repeat mode (see MODE chapter), or while playing a program, searching is only possible within the particular track.

order to activate one of the following ‘modes’. The

active mode is shown in the display.

ySHUFFLE : All tracks of the CD are played in

random order until all of them have been played
once.
ySHUFFLE REPEAT ALL : All tracks of the CD
are played repeatedly in random order.
yREPEAT : The current track is played repeatedly.
yREPEAT ALL : The entire CD is played repeatedly.	E S P	SHUFFLE
		REPEAT ALL
ySCAN: The first 10 seconds of each of the remain-
ing tracks are played in sequence.

2Playback starts in the chosen mode after 2 seconds.

•To return to normal playback, press MODE repeatedly until the display shows no active modes.

ESP

With a conventional portable CD-player you might have experienced that the music stopped e.g. when you were jogging. The Electronic Skip Protection prevents loss of sound caused by light vibrations and shocks. Continuous playback is ensured. However ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping!

In this set ESP is default ON. It is possible to set ESP off.

•Press MODE for more than 2 seconds. y ESP disappears.

•Press MODE again for more than 2 seconds. y ESP is displayed.

ESP on ➟ ESP off ➟ ESP on

these hints, consult your dealer or service center.

The CD player has no power, or playback does not start

•Check that your batteries are not dead or empty, that they are inserted correctly, that the contact pins are clean.

•Your adapter connection may be loose. Connect it securely.

•For in-car use, check that the car ignition is on. Also check player’s batteries.

The indication no diSC is displayed

•Check that the CD is clean and correctly inserted (label-side upward).

•If your lens has steamed up, wait a few minutes for this to clear.

The indication nF diSC is displayed

• CD-RW (CD-R) was not recorded properly. Use FINALIZE on your CD-recorder.

The indication HOLD is on and/or there is no reaction to controls

•If HOLD is activated, then deactivate it.

•Electrostatic discharge. Disconnect power or remove batteries for a few seconds.

The CD skips tracks

•The CD is damaged or dirty. Replace or clean the CD.

•RESUME, SHUFFLE or PROGRAM is active. Switch off whichever is on.

No sound or bad sound quality.

•PAUSE might be active. Press 2;.

•Loose, wrong or dirty connections. Check and clean connections.

•Volume might not be appropriately adjusted. Adjust the volume.

•Strong magnetic fields. Check player’s position and connections. Also keep away from active mobile phones.

•For in-car use, check that the cassette adapter is inserted correctly, that the car cassette player’s playback direction is correct (press autoreverse to change), and that the cigarette lighter jack is clean. Allow time for temperature change.