RECORDING
GENERAL INFORMATION ON RECORDING
•Recording is permissible insofar as copyright or other rights of third parties are not infringed.
•This deck is not suitable for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording, use only NORMAL type cassettes (IEC I) on which the tabs have not been broken.
•The best recording level is set automatically. Altering the VOLUME and DBB controls will not affect the recording in progress.
•At the very beginning and end of the tape, no recording will
take place during the 7 seconds, when the leader tape passes |
|
the recorder heads. |
|
• To protect a tape from accidental erasure, have the tape in | 1 |
front of you and break out the left tab. |
|
Recording on this side is no longer possible. To record over this |
|
side again, cover the tabs with a piece of adhesive tape. |
|
English
SYNCHRO START CD RECORDING
1.Select CD source.
2.Insert a CD and if desired, program track numbers.
3.Press STOP•OPEN 9/ to open the cassette door.
4.Insert a suitable cassette into the cassette deck and close the cassette door.
5.Press RECORD 0 to start recording.
–Playing of the CD program starts automatically from the beginning of the program. It is not necessary to start the CD player separately.
To select and record a particular passage
•Press and hold down on SEARCH ∞ or §.
•When you recognize the passage you want, release SEARCH ∞ or §.
•To pause CD playback press PLAY/PAUSE 2;.
–Recording will begin from this exact point in the track when you press RECORD 0.
6.For brief interruptions during recording, press PAUSE ;. To resume recording, press PAUSE ; again.
7.To stop recording, press STOP•OPEN 9/.
D | BB | AZ | 1040 |
|
|
|
|
| D |
|
|
|
| IGITAL |
|
|
|
| TUNER |
|
|
|
|
| PR |
MODE |
|
|
|
|
PLAY• | PAUSE |
|
| BATT |
STOP | PROG | LOW | ||
|
|
|
| |
| SEARCH |
|
|
|
15