FEATURES
English
Programming track numbers
You can select up to 99 tracks and store them in |
|
|
memory in a desired sequence. Any track can be stored |
|
|
more than once. |
|
|
1 While playback is stopped, select a track with |
|
|
° or ¤. | PROGRAM |
|
| MODE | |
|
|
2Press PROGRAM to store the track.
y PROGRAM lights up; the track number programmed and P with the total number of stored tracks are displayed.
3Select and store all desired tracks in this way.
4Press 2; to start playback of your selected tracks. y PROGRAM is shown and playback starts.
•You can review the program by pressing PROGRAM for more than 2 seconds. y The display shows all stored tracks in sequence.
Notes: – If you press PROGRAM and there is no track selected, SELECt is displayed.
– If you try to store more than 99 tracks, FULL is displayed.
Clearing the program
1If necessary, press 9 to stop playback.
2Press 9 to clear the program.
y CLEAr is displayed once, PROGRAM goes off and the program is cleared.
Note: The program will also be cleared if you
–interrupt the power supply or
–open the CD lid,
–or if the set switches off automatically.
14