IN-CAR Connection, Put the CD player on a

Philips AZ 9235 manual IN-CAR Connection, In-car use connections supplied or optionally available

Page 19

IN-CAR CONNECTION

In-car use (connections supplied or optionally available)

Only use the AY 3545 car voltage converter (4.5 V, DC, positive pole to the centre pin) and the AY 3501 car cassette adapter. Any other product may damage the set.

1Put the CD player on a

horizontal, vibration-free and stable surface. Make sure it is in a safe place, where the

player is neither a danger nor obstacle to the driver and passengers.

4,5 V DC

DIGITAL

DBB

ESP

PROGRAM

MODE

English

2Connect the DC plug of the voltage converter to the 4.5V DC socket of the CD player (only for a 12 V car battery, negative grounding).

3Insert the voltage converter into the cigarette lighter socket. If necessary, clean the cigarette lighter socket to obtain a good electrical contact.

4Turn down the volume and connect the cassette adapter plug to the LINE OUT/p socket of the CD player.

5Carefully insert the cassette adapter into the car radio’s cassette compartment.

6Make sure the cord does not hinder your driving.

7Start the CD player, set VOL E to position 8 and adjust the sound with the car radio controls.

•Always remove the voltage converter from the cigarette lighter socket when the CD player is not in use.

Notes: – Avoid excessive heat from the car heating or from direct sunlight (e.g. in a parked car in the summer).

–If your car radio has a LINE IN socket, it is better to use it for the car radio connection instead of the cassette adapter. Connect the signal lead to this LINE IN socket and to the LINE OUT/p socket of the CD player.

Image 19

Contents

Azaz Exportador País de Origen China Nº de Serie MéxicoEnglish Page Español GuaranteesEnglish FrançaisLocks all buttons CONTROLS, refer to the illustration onQuick Start Batteries supplied or optionally available Power SupplyBattery indication Battery type ESP on ESP offRechargeable ECO-PLUS NiMH batteries AY 3362 only Rechargeable ECO-PLUS NiMH battery handlingRecharging the ECO-PLUS NiMH batteries on board Use your head when using headphones Power SUPPLY/HEADPHONESHeadphones HE Connect the supplied headphones to the Line OUT/p socketPlayer on and start CD playback CD PlayPlaying a CD Push the Open 2 slider Lid opensPlayback information Volume and bassVolume adjustment Bass adjustmentSelecting a track during playback FeaturesSelecting a track when playback is stopped Selecting a track and searchingClearing the program Programming track numbersStoring the last position played Resume Switch the slider to Hold to activate HoldLocking all buttons Hold ESP Scan The first 10 seconds of each Selecting different playing possibilities ModePlayback starts in the chosen mode after 2 seconds Played repeatedly in random orderOptical out not on all versions Remote control not on all versionsIn-car use connections supplied or optionally available IN-CAR ConnectionPut the CD player on a Problem Possible cause Solution TroubleshootingNo sound or ActiveAvoid dropping the set as this may cause damage General InformationCD player and CD handling Environmental information

Related manuals

Philips AZ 9235 manual IN-CAR Connection, In-car use connections supplied or optionally available

IN-CAR CONNECTION

In-car use (connections supplied or optionally available)

1Put the CD player on a