Philips AZ 9235 manual Rechargeable ECO-PLUS NiMH batteries AY 3362 only

Page 9

POWER SUPPLY

ECO-PLUS NiMH battery information (for versions supplied with

rechargeable ECO-PLUS NiMH batteries AY 3362 only)

Recharging works only on players with supplied rechargeable

ECO-PLUS NiMH batteries AY 3362.

Recharging the ECO-PLUS NiMH batteries on board

1Make sure you insert the rechargeable ECO-PLUS NiMH batteries AY 3362.

2 Connect the mains adapter to the 4.5V DC socket of the player and to the wall socket.

y A filled with 0–3 sections (depending on the

level of charge) is shown and ChArGE is displayed.

Recharging stops when you start playback or when approximately 7 hours have passed by.

3When the batteries are fully recharged, is

shown and FULL is displayed.

Notes: – It is normal for the batteries to become warm during recharging.

If the batteries become too warm, recharging will be interrupted for approximately 30 minutes and Hot is displayed.

To ensure proper recharging on board, take care that contacts are clean, and you are using only the ECO-PLUS NiMH batteries AY 3362.

Rechargeable ECO-PLUS NiMH battery handling

Recharging already charged or half-charged batteries will shorten their lifetime. Therefore, after using the rechargeable ECO-PLUS NiMH batteries a few times, discharge them completely before recharging.

To avoid a short circuit, the batteries should not touch any metal objects.

When the batteries quickly become empty after recharging, the contacts are dirty or the end of their lifetime has been reached.

English

9

Image 9 Contents
Azaz Exportador País de Origen China Nº de Serie MéxicoEnglish Page English GuaranteesFrançais EspañolLocks all buttons CONTROLS, refer to the illustration onQuick Start Battery indication Power SupplyBattery type ESP on ESP off Batteries supplied or optionally availableRechargeable ECO-PLUS NiMH battery handling Rechargeable ECO-PLUS NiMH batteries AY 3362 onlyRecharging the ECO-PLUS NiMH batteries on board Headphones HE Power SUPPLY/HEADPHONESConnect the supplied headphones to the Line OUT/p socket Use your head when using headphonesPlaying a CD CD PlayPush the Open 2 slider Lid opens Player on and start CD playbackVolume adjustment Volume and bassBass adjustment Playback informationSelecting a track when playback is stopped FeaturesSelecting a track and searching Selecting a track during playbackClearing the program Programming track numbersSwitch the slider to Hold to activate Hold Storing the last position played ResumeLocking all buttons Hold ESP Playback starts in the chosen mode after 2 seconds Selecting different playing possibilities ModePlayed repeatedly in random order Scan The first 10 seconds of eachOptical out not on all versions Remote control not on all versionsIN-CAR Connection In-car use connections supplied or optionally availablePut the CD player on a Problem Possible cause Solution TroubleshootingNo sound or ActiveCD player and CD handling General InformationEnvironmental information Avoid dropping the set as this may cause damage
Related manuals
Manual 22 pages 39.06 Kb