CD PLAYER
CD DISPLAY INDICATION
English
–Total track number: in stop mode
–Current track number: during CD play.
–SHUFFLE/REPEAT modes: when the respective mode is activated
–PROGRAM: When active. P also appears briefly when you store a track
–NO: no disc
–E: error in CD operation or with the CD (see Troubleshooting)
–F: program memory full
CD | PROGRAM |
| |
| SHUFFLE |
| REPEAT |
| ALL |
PLAYING A CD
1.Set the source selector to CD
2.To open the CD door, press OPEN on the CD door.
3.Insert a CD with the printed side facing up and press the CD door gently to close.
™The CD player scans the contents of the CD and the total number of tracks is displayed.
4.Press PLAY/PAUSE 2; to start playback.
5.Adjust the sound using the VOLUME, INCREDIBLE SURROUND and BASS controls.
6.To interrupt playback press PLAY/PAUSE 2;. To resume, press PLAY 2 again
™The current track number flashes in the display
7.To stop CD play, press STOP 9.
8.To switch off the set, adjust the source selector to TAPE/OFF position (with the cassette keys released)
Note: CD playback will also stop when:
–the CD door is opened;
–the source selector is in MW/FM or TAPE/OFF position;
–the CD has reached to the end;
SELECTING A DIFFERENT TRACK
OPEN
PLAY
RECORD
PLAY•PAU | ; |
SE | |
| PR |
STOP |
|
During playback, you can use the SEARCH keys to select a particular track.
1.Press SEARCH § once for the next track, or press repeatedly until the desired track number appears in the display.
Press SEARCH ∞ once to return to the beginning of a current track.
Press SEARCH ∞ more than once for a previous track.
2.If you have selected a track number in the stop or pause position, you will need to press PLAY/PAUSE 2; to start playback.
Finding a passage within a track
1.Press and hold down SEARCH ∞ or §.
™ The CD is played at high speed and low volume.
2.When you recognize the passage you want, release the SEARCH button.
SEARCH
PLAY
RECORD
PROGR
SEARCH
6