Philips AX5306, AX5305, AX5303 Selecting different playing possibilities−MODE, Resume and Hold

FEATURES

Selecting different playing possibilities−MODE

It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track.

RESUME and HOLD
You can interrupt playback and continue (even after an
extended period of time) from the position where
playback stopped (RESUME) and you can lock all buttons	SAVE
of the set so that no action will be executed (HOLD).	POWER
Use the OFF–RESUME–HOLD slider for these functions.	ON
	ESP

1Press MODE during playback as often as required in order to activate one of the following ‘modes’. The active mode is shown in the display.

y shuffle : All tracks of the CD are played in random order until all of them have been played

once.

y shuffle repeat all : All tracks of the CD are played repeatedly in random order.

y repeat : The current track is played repeatedly.

yrepeat all : The entire CD is played repeatedly.

y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence.

2Playback starts in the chosen mode after 2 seconds.

PROGRAM MODE

shuffle repeat all

RESUME – continuing from where you have stopped

1Switch the slider to RESUME during playback to activate RESUME. y resume is shown.

2Press STOP whenever you want to stop playback.

3Press 2; whenever you want to resume playback. y resume is shown and playback continues

from where you have stopped. resume

•To deactivate RESUME, switch the slider to OFF. y resume goes off.

HOLD – locking all buttons

•To return to normal playback, press MODE repeatedly until the display shows no active modes.

ESP / Power Save Mode

With a conventional portable CD-player you might have experienced that the music stopped e.g. when you were jogging. The ELECTRONIC SKIP PROTECTION prevents loss of sound caused by light vibrations and shocks. Continuous playback is ensured. However ESP does not prevent playback interruptions during vigorous running. It also does not protect the unit against any damage caused by dropping!

The power save mode helps to extend battery lifetime for longer playback.

•Switch the slider to ESP ON during playback to activate the shock protection.

y is shown and the protection is activated.

•To deactivate the shock protection and enter the power save mode, switch the slider to POWER SAVE.

y goes off

This model offers a double lock function to prevent buttons from being accidentally pressed and activated. You can choose to lock all buttons on either your set, remote control or even both! Simply adjust the respective HOLD slider to HOLD on or off position as desired. For example :

1Switch the OFF–RESUME–HOLD slider to HOLD to activate HOLD on the set. y All buttons are locked and HOLd is shown

when you press any button.on the set If the set

is switched off, HOLd will be shown only

when 2; is pressed.	hold
2 To deactivate HOLD, switch the slider to OFF.	resume

Note: – If you deactivate HOLD by switching the slider

on the set to RESUME, you will be activating the RESUME function.

–No HOLd display indication is available if you have activated the HOLD command on the remote control.