EMI T3HB, T4HB, T2HB manual S2HB Electrical Wiring Installation Section, Rating plate

Page 5

S2HB Electrical Wiring Installation Section

! DANGER !

The EMI America Series condensing unit must:

•Be connected to a properly grounded electrical supply with the proper voltage as stated on the rating plate.

•Have proper over current protection (i.e. time- delay fuse/HACR-Breaker) as listed on the Rating Plate.

Failure to follow these instructions can re- sult in a fiire, explosion, or electrical shock causing property damage, personal injury, or death.

! DANGER !

Do not use the EMI America Series condensing unit with any electrical supply voltage other than the one listed on the rating plate.

Check the rating plate on the unit for the correct voltage rating. Failure to use the correct voltage may result in death, serious bodily injury or property damage. If you have any questions or doubts, consult the factory before installing this unit.

1.All electrical wiring must be run according to NEC and local codes.

2.Refer to the unit rating plate for voltage, minimum circuit ampacity and over cur- rent protection requirements.

rating plate

3.Use only HACR type breakers or time delay fuses. Select the wire size accord- ing to the ampacity rating.

4.To access electrical connections and wiring diagram:

a)Remove the screws on the side panel adjacent to the back panel.

b)The screws adjacent to the front panel should already be loose (don't remove them).

c. Slide the side panel out to access the high/low electrical connections and wire diagram.

Note: Remove the plastic edge guards from the holes and replace with a water- tight strain relief fitting (High V) and a split grommet fitting (low V)

5.Power should be run to a weather proof disconnect box usually within 3 feet of the unit.

6.From the disconnect box, run the power through the 7/8" hole on the side of the unit and into the electrical box and an- chor with the strain relief fitting.

7.Run wires to the high volt pigtail in the con- trol box and attach L1 and L2 connections. Also run green wire to ground wire.

Multi-zone Heat Pump Condensing Units

5

www.enviromaster.com

Page 4 Page 6
Image 5
Page 4 Page 6
Contents Installation, operation and maintenance Manual EMI America Series Multi-zone Heat Pump Condensing Units To the Installer Safety InstructionsDescription Installer Supplied ItemsSystem Options Items for ConsiderationS2HB Unit Mounting Section S2HB Installation Instructions SectionRating plate S2HB Electrical Wiring Installation SectionCompleted Electrical Connections Low Volt ConnectionElectrical Wiring DiagramWith a screw Driver punch S2HB, T2HB, T3HB, & T4HB models Multi-Zone Heat Pump Refrigerant Piping InstallationTrap may be fabricated using Trap InstallationBraze tubing into fittings Piping Connections Recap of COMPLETingField Charging Multi-zone Heat Pump Field Charging Multi-zone Heat Pump Field Charging Multi-zone Heat Pump Field Charging Multi-zone Heat Pump Field Charging Starting the Unit On the R-22 Scale of the low- side gaugeTest Unit Performance Data Start-up and Troubleshooting Test procedurePump Multi-zone Condenser Sequence of OperationDefrost Control General Recommendations Operation and MaintenanceSpecific Changes Specifications may change without notice S2HB dimensions and specificationsHspf S2HB System PerformanceUNH S2HB Liquid Suction T2HB, T3HB, and T4HB dimensions and specificationsT2HB, T3HB, & T4HB models T2HB, T3HB, and T4HB specificationsT2HB, T3HB, or T4HB Top Discharge CAH T3HB, or T4HB EMI’s High Seer Product Line Phone Success Drive Fax Rome, NY

S2HB, T2HB, T3HB, T4HB specifications

The EMI T4HB, T3HB, T2HB, and S2HB models represent innovative advancements in the field of electronic security and surveillance technology. Each model is designed to meet specific security needs while integrating cutting-edge features, making them suitable for a variety of applications, from residential monitoring to large-scale facility management.

Starting with the T4HB, this model is known for its high-definition video capabilities and robust build quality. It offers 4K resolution, providing crystal-clear image quality that captures fine details, making it easier to identify subjects. The T4HB is equipped with advanced night vision technology, allowing it to perform optimally in low light conditions. Additionally, it features motion detection and smart analytics that minimize false alarms and provide users with real-time alerts. The integration with cloud storage solutions ensures that footage is securely saved and easily accessible from various devices.

The T3HB is a slightly scaled-back version, yet it does not compromise on essential features. It supports 1080p full HD resolution and incorporates many of the same intelligent analytics capabilities as its T4HB counterpart. With a wide-angle lens, the T3HB allows coverage of larger areas with fewer cameras. Its weather-resistant design makes it suitable for both indoor and outdoor installations, protecting it from the elements and ensuring reliable performance.

Next is the T2HB, which balances performance and affordability. This model retains high-definition video quality and basic motion detection features, making it ideal for budget-conscious consumers who still want reliable surveillance. The T2HB focuses on user-friendliness with simple setup processes and mobile app integration that allows for easy remote monitoring, making it an attractive option for homeowners.

Lastly, the S2HB is engineered for versatility. It combines the advantages of all previous models, providing excellent video quality and configurable settings for personalized security needs. The S2HB stands out with its smart home compatibility, enabling integration with various smart devices in a home security ecosystem. Its compact design allows for flexible mounting options without compromising performance.

Together, the EMI T4HB, T3HB, T2HB, and S2HB models reflect a commitment to quality, innovation, and user satisfaction in the modern security landscape. They cater to various needs, ensuring that users can find a suitable solution for their surveillance requirements while benefiting from advanced technologies that enhance security and peace of mind.
Top Page Image Contents