Philips AX5003/10 manual Selecting different playing possibilities Mode, Resume and Hold

Page 10

English

FEATURES

Selecting different playing possibilities – MODE

It is possible to play tracks in random order, to repeat a single track or the entire CD, and to play the first few seconds of each track.

1Press MODE during playback as often as required in order to activate one of the following ‘modes’. The

active mode is shown in the display.

y SHUFFLE: All tracks of the CD are played in random order until all of them have been played once.

y SHUFFLE REPEAT ALL: All tracks of the CD are played repeatedly in random order.

yREPEAT: The current track is played repeatedly.

yREPEAT ALL: The entire CD is played repeatedly.

y SCAN: The first 10 seconds of each of the remaining tracks are played in sequence.

2Playback starts in the chosen mode after 2 seconds.

To return to normal playback, press MODE repeatedly until the display shows no active modes.

FEATURES

RESUME and HOLD

You can interrupt playback and continue (even after an extended period of time) from the position where playback stopped (RESUME) and you can lock all buttons of the set so that no action will be executed (HOLD). Use the RESUME–HOLD–OFF slider for these functions.

RESUME – continuing from where you have stopped

1Switch the slider to RESUME during playback to activate RESUME. y RESUME is shown.

2Press 9 whenever you want to stop playback.

3Press 2; whenever you want to resume playback.

y RESUME is shown and playback continues from where you have stopped.

To deactivate RESUME, switch the slider to OFF. y RESUME goes off.

HOLD – locking all buttons

You can lock the buttons of the set by switching the slider to HOLD. Now, when a key is pressed, no action will be executed. This is of use, for example, when transporting the player in a bag. With HOLD activated, you can avoid accidental activation of other functions.

1Switch the slider to HOLD to activate HOLD.

y All buttons are locked. HOLD is shown when you press any button. If the set is switched off, HOLD will be shown only when 2; is pressed.

2To deactivate HOLD, switch the slider to OFF.

Note: If you deactivate HOLD by switching the slider to RESUME, you will be activating the RESUME function.

English

16

17

Image 10
Contents AX5002 AX5003 AX5004 México Page Français GuaranteesEnglish EspañolRemote control not on all versions CONTROLS, refer to the illustration onPower Supply Environmental information Headphones HE General Information CD-player and CD handlingPlaying a CD Volume and bassCD Play Playback informationSelecting a track and searching FeaturesProgramming track numbers Resume and Hold Selecting different playing possibilities ModeResume continuing from where you have stopped Hold locking all buttonsPouch AY 3266 supplied or optionally available IN-CAR ConnectionIn-car use connections supplied or optionally available Troubleshooting Problem Possible cause Solution