CD PLAY
English | Playing a CD | |
This | ||
| ||
| as | |
| play a |
1Push the OPEN 2 slider to open the player.
2Insert an audio CD, printed side up, by pressing the CD onto the hub.
3Close the player by pressing the lid down.
4Press 2; to switch the player on and start playback. y The current track number and elapsed playing
time are displayed.
•You can pause playback by pressing 2;.
y The time at which playback was paused starts flashing.
•You can continue playback by pressing 2; again.
5Press 9 to stop playback.
y The total number of tracks and the total playing time of the CD are displayed.
CD PLAY
| Playback information | English | |
• If a | |||
| |||
| nF dISC is displayed, indicating that the CD has not been finalized. In that |
| |
| case, use FINALIZE on your CD recorder to complete the recording. |
| |
• When playing a |
| ||
| after pressing 2; for sound reproduction to start. |
| |
• Playback will stop if you open the CD lid. |
| ||
• While the CD is read, 1 |
|
Volume and bass
Volume adjustment
• Adjust the volume by using VOL E.
Bass adjustment
You can choose between the bass enhancement levels dbb1 and dbb2.
1 Press BASS once for dbb1 and twice for dbb2.
y dbb1 or dbb2 is displayed and is shown.
2To switch dbb1 or dbb2 off, press BASS twice or once, respectively.
6Press 9 again to switch the player off.
•To remove the CD, hold it by its edge and press the hub gently while lifting the CD.
Note: If there is no activity, the set will automatically switch off after a while to save energy.
0 |
y goes off.
12 | 13 |