Philips DCB2020 Set clock, Demonstrate features, Play a disc, Play from a USB storage device

Set clock

1 In standby mode, press and hold PROG/CLOCK SET to activate clock setting.

	»»[CLOCK SET] (set clock) scrolls on
	the display, and then [CLOCK 24]
	(24-hour time format) is displayed with
2	"24" blinking.
	Press	/	or VOL +/- to select
	[CLOCK 24] or [CLOCK 12] (12-
	hour time format), and then press
	PROG/CLOCK SET.
3	»»The hour digits begin to blink.
	Press	/	or VOL +/- to set the hour.
4	Press PROG/CLOCK SET again.
5	»»The minute digits begin to blink.
	Press	/	or VOL +/- to set the minute.
6	Press PROG/CLOCK SET to confirm the

clock setting.

»»The set clock is displayed.

•To exit clock setting without storing, press .

Note

•• If no button is pressed in 90 seconds, the system exits clock setting mode automatically.

Tip

•• To adjust the digits of hour or minute, you can also turn the VOLUME knob or press PRESET/ALBUM +/- on the main unit.

Demonstrate features

1 In normal standby mode, press .

• [WELCOME TO PHILIPS] (welcome to Philips) scrolls on the display, and then feature names one by one.

2 To exit the feature demonstration, press again.

5 Play

Play a disc

Caution

•• Risk of damage to the product! During play, never move the product.

•• Never put any object other than a disc into the disc compartment.

•• Never look at the laser beam inside the player.

•• Never play discs with accessories such as disc stabilizer rings or disc treatment sheets.

1 Press CD to select the disc source.

2 Load a disc.

1)Press to eject the disc tray.

2)Place a disc onto the disc tray with its label facing up.

3)Press to close the disc compartment.

3 Press if the play does not start automatically.

Play from a USB storage device

This product can play files that are copied onto a supported USB storage device:

•flash drive

•memory card reader

•HDD (This product can only detect a portable hard disc drive with the peak current no higher than 500 mA through the USB socket.)

Note

•• Philips does not guarantee compatibility with all USB devices.

•• NTFS (New Technology File System) data format is not supported.

10EN