Use the menu

Tune to the next FM radio station with sufficient signal strength at the lower/higher frequency:

Press and hold / to start the auto search.

Tune to the FM radio station at a specific frequency:

Press / repeatedly until the frequency digitals are displayed.

Program FM radio stations automatically: Press and hold MODE/SCAN or PROG/ CLOCK SET to start the auto programming.

Program DAB radio stations automatically: Press and hold MODE/SCAN to start the auto programming.

Program radio stations manually:

1)Tune to a radio station.

2)Press PROG/CLOCK SET to activate the programming.

3)Press / to assign a sequence number to the radio station.

4)Press PROG/CLOCK SET to confirm.

5)Repeat steps 1-4 to program more radio stations.

Tune to a preset radio station: Press / repeatedly.

Switch the audio mode between [STEREO] (stereo) and [MONO] (monophonic) for FM radio:

Press OK repeatedly.

Display available information about the current radio station:

Press RDS/DISPLAY repeatedly.

Synchronize the clock with an RDS radio station:

1)Tune to an RDS radio station that transmits time signals.

2)Press and hold RDS/DISPLAY until [CT SYNC] is displayed.

When you listen to radio, you can access the menu for control options.

1 Press MENU/ .

»»FM mode: [SCAN SETTINGS] is displayed.

»»DAB mode: [STATION] is displayed.

2 Press / to select a menu option,

and then press OK or to confirm the option or enter the lower-level menu.

FM mode:

	[SCAN	Search and store radio stations
	SETTINGS]	automatically: [STRONG] for
		radio stations with strong signal
		only, [ALL] for all radio stations.
	[AUDIO]	Select a sound mode: [STEREO]
		or [MONO].
	[SYSTEM]	[RESET]: Reset all radio settings
		to the factory default status.
		[SW VER]: Display the current
		version of the firmware.
		[UPGRADE]: Upgrade the
		firmware.
	DAB mode:

	[STATION] Access the list of the previously
		stored DAB radio stations.
		• Press	/	to select
		a station, and then			to
		start listening.
	[FULL	Scan and store DAB radio
SCAN]		stations within full range.
[MANUAL] Tune to a DAB radio station
		manually.
	[DRC]	Dynamic range control: Select
		a level for the effect of dynamic
		range control.
	[SYSTEM]	[RESET]: Reset all radio settings
		to the factory default status.

[SW VER]: Display the version of the current firmware.

[UPGRADE]: Upgrade the firmware.

3 Press MENU/ to exit the menu.

14EN