MP3126.OM.QXD 5/5/03 10:11 AM Page 5
POWER SOURCES
This unit is designed to operate on AC household current or DC (batteries). | |
|
AC:
Use the AC polarized line cord included with the unit for operation on AC power. Insert one end of the AC line cord into the AC power jack on the rear of the unit and the other end(withthe 2 blades) into a conveniently located AC outlet having 120V, 60Hz. When the
AC cord is plugged in, the batteries will be disconnected. NOTE: The AC plug supplied with the unit is polarized to help minimize the possibility of electric shock. If the AC plug does not fit into a nonpolarized AC outlet, do not file or cut the wide
blade. It is the user’s responsibility to have an electrician replace the obsolete outlet.
BATTERY INSTALLATION
To use this unit with battery power, remove the battery compartment on the rear of the unit by pressing in on the two tabs and lifting the battery door off. Insert eight (8) ‘C’ size batteries following
the diagram in the compartment.
NOTE: The AC power cord must be disconnected from the AC power jack on the rear of the unit in order for the unit to operate on battery power.
+
-
-
+
+
+
-
+
-
+
+
+
BATTERY PRECAUTIONS
Follow these precautions when using batteries in this device:
1.Use only the size and type of batteries specified.
2.Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device.
3.Do not mix different types of batteries together (e.g. Alkaline and
4.If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage.
5.Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.)
HEADPHONE JACK
For private listening, connect low impedance 3.5mm (32 ohm) stereo headphones (not included) to this jack. The speakers are automatically disconnected when the headphone plug is inserted in the jack.
5