Jwin JX-CD477 instruction manual Auto Power on Function, Auto Power OFF Function, Playing a Disc

Page 3

3.Slide the charge switch to ON position to start charging. The charge indicator will light up. USE ONLY THE AC ADAPTOR FOR CHARGING.

4.After 15 hours, please unplug the AC adaptor and slide the recharge switch to OFF position.

DO NOT CHARGE CONTINUOUSLY FOR 24 HOURS OR MORE. DOING SO CAN CAUSE

THE PERFORMANCE OF THE RECHARGEABLE BATTERIES TO DETERIORATE. NOTE: You may play DISC’S whilst charging the batteries.

If the operating time decreases drastically even when the rechargeable nickel-cadmium batteries are properly recharged, purchase a new set of rechargeable nickel-cadmium batteries. When charging for the first time or after a long time, playing time may be reduced. In this case, charge and discharge the batteries several times.

NOTE ON ALKALINE BATTERIES

1.When replacing the alkaline batteries, use two new batteries of the same type. Do not mix a used battery with a new one or mix different types of batteries.

2.When inserting the batteries, be sure to place the batteries as the sketch shown, mistakenly inserting even one with improper polarity will cause leakage and the unit will not play properly.

3.When not using the unit for an extended period of time, or not using the batteries for a long time, remove them to prevent possible acid leakage or corrosion re- sulting in damage to your player or personal injury such as skin burns.

4.Bear in mind that battery life expectancy is based upon playing mode. Maxi- mum battery power consumption happens at maximum settings. If sound gets distorted or if the unit fails to switch tracks, your batteries are weak. Replace both batteries, or use AC adaptor. (not included)

5.Never charge, heat, disassemble, or throw batteries into a fire.

6.If the display shows the symbol “ ”, this means your batteries are weak, replace them or use the AC adaptor.

7.If the display is blank - no numbers show when power is turned on, the batteries are dead.

Replace them or use the AC adaptor.

AUTO POWER ON FUNCTION

The power turns on automatically when the PLAY/PAUSE button is pressed.

AUTO POWER OFF FUNCTION

When all the tracks on a disc have been played, or the Stop button is pressed, the power turns off automatically within 60 seconds if no button is pressed.

If you pressed the Stop button twice the power will turn off

LISTENING WITH HEADPHONES/EARPHONES

Connect the plug of the stereo headphone/earphone into the headphone jack (marked phones) before use the unit.

CAUTION: Hearing experts advise against exposure to continuous extended play at loud volume levels while using headphones, possible hearing loss may result.

If you experience a ringing in the ears, reduce volume or discontinue use. We want you listening for a life time.

PLAYING A DISC

Be sure to reduce the volume before plugging in or unplugging the headphones/ earphones

1.Plug the cord of headphone/earphone into the PHONES jack.

2.Slide the Door Open button to open the CD door.

E.2

Image 3
Contents Portable Compact Disc Player with ANTI-SHOCK 10SEC Charging and USE of Rechargeable Batteries Control Operation and Function Power SupplyLocation of Controls DC OperationPlaying a Disc Auto Power on FunctionAuto Power OFF Function Listening with HEADPHONES/EARPHONESBass Boost Using of Remote Control AudioTrack Search FORWARD/REVERSE SearchRandom or Shuffle Play Single Track RepeatALL Tracks REPEAT/CONTINUOUS Play Intro PlayFingerprints on Lens Connecting to Home Stereo SystemsCleaning Cleaning the Pickup Lens ANTI-SKIP Memory Function 10SECHandling Compact Discs Cleaning the CabinetCleaning Discs Technical SpecificationsTrouble Shooting Guide Symptom Cause Solution