CD
Playing a CD
1.Open the CD Door and load a CD.
2.After loading a CD for play, adjust the CD/AUX/RADIO switch to CD Mode.
3.The loaded CD will begin playing automatically.
If the CD doesn’t begin playing automatically, press the Play/Pause button to play or pause the CD.
Programming a CD
1.After loading a CD, press the Program button. The CD must be stopped before it can be programmed.
“01” will flash on the LED Display to indicate that the unit is in Program Mode.
2.Press the Skip Dn and Skip Up buttons to select a track from the CD.
3.Press the Program button to add the selected track to the program.
4.Repeat steps
Customer Support: | 9 |