6.) Press the PLAY/PAUSE 
button. Playback begins on track “01” and the Play indicator appears in the display.
Adjust the VOLUME and BASS BOOST controls as desired.
7.) Playback will continue until the last track has played then the disc stops, the Play indicator disappears, and the display again shows the total number of tracks on the disc.
To stop playback before the disc ends press the STOP 
button at any time. The disc stops and the display again shows the total tracks on the disc.
8.) If you are finished listening remove your disc from the player and close the CD door.
9.) Slide the POWER OFF/CD/RADIO selector switch back to the POWER OFF position. The POWER indicator goes off.
Pause Control
To pause momentarily during CD playback press the PLAY/PAUSE 
button again.
The sound stops and the track number display flashes but the disc continues to spin.
Press the PLAY/PAUSE 
button again to cancel the Pause mode and resume normal playback. The sound resumes at the same point on the disc and the track number display stops flashing.
13
SB250A_011205.p65 | 13 |
12/1/2005, 17:25