6.) When the program is completed the player stops and the display again shows the total tracks on the disc. The PROG indicator goes ‘Off’but the program sequence remains in the memory.
To repeat the program press the PROGRAM button and then press the PLAY/
PAUSE 
button.
To cancel the program from the memory, press the STOP programming mode.
button at
Programmed Repeat Playback
You may use the Programmed Playback and Repeat features together to continuously repeat a programmed sequence.
First program the desired sequence according to steps 1 through 5 on page 16.
When Programmed Playback begins press the REPEAT button twice to select the Repeat All Tracks mode.
The REPEAT indicator and the PROG indicator light up. The programmed sequence will be repeated continuously.
PHONES Jack
The Stereo Headphone Jack is located on the back cabinet. Connect a set of stereo headphones (not included) to this jack for private listening without disturbing others.
The internal speakers are automatically disconnected when headphones are connected to the PHONES jack.
IMPORTANT: When using headphones always set the volume control to a low level before you put the headphones on. Then put the headphones on and gradually increase the volume to a comfortable listening level.
17
SB250A_011205.p65 | 17 |
12/1/2005, 17:25