Emerson PD6900 owner manual Setting the Clock

Page 13

SETTING THE CLOCK

Clock can be set while clock time is displayed, at Power ‘Off’mode only, and follow the procedures below:

1.) Press the MEMORY button for more than one second. The Hour will start flashing.

PROGRAM

MEMORY

AM

2.) Adjust the hour by pressing the / buttons. Set the correct hour for AM or PM.

3.) Press MEMORY button to confirm. Minutes will start flashing.

PM

4.) Adjust the minutes by pressing the / buttons.

5.) Press MEMORY button to store the time.

PM

NOTE:

•If button is not pressed within 5 seconds, the clock display stops flashing.

•If the unit is disconnected from the AC power and no batteries installed, you will need to reset the clock.

12

PD6900_ib_053102.p65

12

31/5/2002, 17:24

Image 13

Contents PD6900 Important Safety Instructions Before WE Begin Thank you… … … … … … Important Notes Power SourceClass 1 Laser Product FCC Information Unpacking and SET-UP Preparation for USEImportant Information TOP Panel Front Panel Back Panel Location of Controls and IndicatorsAdjusting the Sound Power SupplyBattery Operation Listening to the RadioFor Better Reception Preset Radio Station in the MemoryRecalling Stations in the Memory To Interrupt Playback Compact Disc PlaybackTo Skip to the Beginning of a Track To Stop PlaybackRepeat Playback Random Playback Programmed PlaybackSetting the Clock CD Storage Compartment Compact Disc Care Care and MaintenanceCleaning the Unit Symptom Possible Cause Solution Radio Troubleshooting GuideEmerson Radio Corp Limited Warranty Emerson Radio Corp