Emerson HD2700 owner manual Power Source, AC Operation

Page 6

POWER SOURCE

This CD player can be operated on either 120V 60Hz AC house current with the AC adapter (not included), or on 3V DC (2 "AA" batteries, not included).

AC OPERATION

Connect an optional AC adapter (not included) to your 120V 60Hz AC outlet. Then connect the small plug to the "DC IN 4.5V" jack on the side of the player as shown in the following illustration.

AC 120V 60Hz

DC 4.5VOutlet

Input Jack

AC / DC Adapter

(Optional)

If you decide to purchase an AC adapter for this unit, it must have the following specifications:

Input: 120V/ 60Hz AC.

Output: 4.5V DC 500mA.

The adapter must have a female-type plug with a positive center:

Positive (+) Negative (–)

Be sure the adapter is UL listed. If you use a “Universal”-type adapter, be sure to set the output selector to “DC 4.5V”.

If the AC adapter will not be used for an extended period of time, remove it from the wall outlet by pulling on the adapter housing. Do not remove the adapter by

pulling on the cord. Do not touch the AC adapter with wet hands.

5

HD2700_ib.p65

5

21/11/2001, 15:46

Image 6
Contents HD2700 Thank you Important Notes Class 1 Laser ProductLocation of Controls LCD Display Indicators Power Source AC OperationBattery Operation Battery ReplacementOperating Instructions Normal PlaybackRepeat Playback Pause ControlSKIP/SEARCH Controls To repeat a single trackTo cancel repeat playback Intro ScanRandom Playback Programmed Playback Electronic ANTI-SKIP Protection Connection to AN External Audio SystemCare and Maintenance Troubleshooting Guide Symptom Cause SolutionWhat other limitations apply to your warranty ? How does state law apply to your warranty ?AU898F Emerson Radio Corp