Archos 704 user manual Sound Settings

MANUAL V1.0	PLAYING MUSIC > p. 17
PlayMode (a status bar icon shows the current mode)
- Single: plays only one music file and stops.
- Folder: plays all music files in the current folder or album.
- All: plays all music files in the ARCHOS device.

-Queue: allows you to select a track to be played after the current one is finished.

-while a track is playing, tap on to switch to the browser window and tap on a track to select it: this is your queued track, and the status bar icon will change.

-you can only queue one track at a time.

-if you do not select a song to queue before the end of the current track, the ARCHOS will play the next track in the folder or album.

-Scan: plays the first few seconds of each track.

-you can define the length to play in Intro duration.

-if you want to play the whole song, tap on it while its intro is playing; the music player will then revert to the Folder play mode.

Repeat & Shuffle (a status bar icon shows the current mode)

-- Normal: plays the track selection once and stops.

- Repeat: plays the track selection repeatedly.

- Shuffle: plays random tracks from the selection.

Intro duration

-defines for how long each track will be played in the Scan play mode.

2.4Sound Settings

•You can access the Sound Settings screen via the Sound menu item.

•This screen allows you to adjust the sound settings of your ARCHOS device to your personal taste.

•Tap on the / buttons to select a different setting for a parameter.

Volume

-adjusts the output volume.

Built-in speaker

-ON/OFF: the built-in speaker remains on or off regardless if headphones are attached.

-Automatic: the built-in speaker automatically turns off when you plug in headphones or an AV Cable.

Audio Output

-defines whether the audio signal is sent out via the Analog Line-Outor the SPDIF interface when connected to a DVR Station.

Bass Boost Level

-adjusts the bass boosting level.